Beam College Essays Samples For Students

1.0 Introduction
Strategic human resource management has become a significant phenomenon in modern organizations. Beam Suntory Inc. is the world’s number three premium spirits company having headquarters in Illinois. The primary products of the enterprise are tequila, Canadian Whisky, Scotch whiskey, rum, vodka, and other ready-to-drink pre-mix cocktails. The company was established in 2011 as a separate identity after it spun off from Fortune Brands holding company. At present, the company is a subsidiary of Suntory Beverage and Food Limited, Japan. The company sells brands that are produced directly by the enterprise. Along with it, it also imports and markets ...

Electron microscopes refer to those microscopes that make use of an electron beam to light a specimen producing a magnified image. These microscopes are used to study structures that are either invisible through naked eyes or those that are too small to be clearly seen using a light microscope. The two major types of electron microscope are Transmission Electron Microscopy or TEM and Scanning Electron Microscopy or SEM (Mooney, 1996).
Transmission Electron Microscopy employs a high voltage electron beam in order to create an image (NE, 2013). The TEM is made up of various components including electromagnetic lens system, electron source, sample ...

More Information about affiliation, research grants, conflict of interest and how to contact.

Spot Detectors and Beam Detectors
Question 1: What is the difference between the operation of spot detectors and beam detectors? Provide three situations where the use of beam detectors is recommended over spot detectors.

Answer: Beam detectors and spot detectors work on different principles.

Beam detection is one of the newest technologies in the field of fire alarms. The principle on which beam detectors operate is referred to as obscuration. Bean detectors have the ability to appropriately sense the percentage of light blockage and the likelihood of them giving false alarms is very less. They are quite well able to distinguish between a trouble condition and other conditions such ...

Uniformly distributed load (UDL) was analyzed for simply supported beam by developing three scenarios in order to ascertain uniformity in this report. It comprised of three chapters in which UDL was converted into one point, two points and three point loads that were applied on the beam having 5 m length under varying condition. In chapter-1, one point load was applied on the beam having value of 0.5 KN/m. The maximum bending moment of UDL and under one point load was found to be 0.47 and 0.38 KN-m respectively. Secondly in chapter 2, UDL was converted into two point ...

1. Introduction to the Technique
Magnification and high resolution imaging are very important in materials science, especially at present when nanotechnology materials are being created. Magnification and high resolution imaging can help in the characterization, identification, and confirmation of the existence of the desired material. Magnification and high resolution imaging become problems when the size of the assessed material becomes too small; such as, they are beyond the micrometer scale. Ordinary techniques in microscopy such as light microscopy where in a traditional light microscope is used could not suffice. Fortunately, in 1931, two scientists named Ernst Ruska and Mx ...

Load cells are the type of transducers that transform force into an electric signal and are used in variety of industrial monitoring applications of weight and force ranging from transportation, oil and gas, industrial automation, and aerospace. There are different types of load cells and the most common type is strain gauge based load cell. Other includes low capacity, mid-range, and high capacity load cells. Low capacity load cells are idyllically used in wind tunnel testing, medical testing equipment, part-counting scales, and weigh check. These low capacity load cells have the range starting from 25 grams up to 150 ...

Survival, Resilience, and Redemption” by Laura Hillenbrand

During the US Civil War, the Union’s famous Gen. Sherman once said that war is “all hell.” Many military commanders, as well as the countless victims of warfare, have echoed this sentiment down through the ages. Certainly, warfare reveals humanity to sometimes be far less than humane. The worst characteristics of human kind are often brought to the forefront by the nature of war and its relentless objectives. But as horrible as warfare can be for the average soldier in the trenches fighting next to his comrades, it can be (and often is) even more nightmarish and unimaginably ...

Objective

Fibre reinforced plastics (FRP) have demonstrated suitability for construction projects due to their strength and durability, while weighing very little. The attributes of FRPs were examined as well as, their applicability in hot, desert temperatures for road barriers and other road safety units.

Background – Composite Materials

Strength and stiffness are the main mechanical properties fibres add to composite materials. The fibres must have uniform diameter, similar strength between each fibre, and very large length-to-diameter ratio. Crystals within the fibre that are aligned with fibre length create high tensile strength. Fibres need to have air space and fibre packing needs to be random ...

(Study Programme)

Introduction

Physics remains a very useful field in the modern technological lives. Without physics, there would be very little understanding of how things work. Physics creates an understanding of the functioning mechanisms of the world and the different elements through such topics as kinetic energy, laws of motion, laws of gravity, mass, etc. Almost every aspect of people’s lives revolves around physics. Consequently, without physics, there wouldn’t be development such as lighting from electricity sources, motor-vehicles, electricity and so on. Physics is, therefore, an arm of science that involves the study of matter characteristics, energy and their ...

Introduction

A natural phenomenon is any non-artificial event not produced by human activity but may affect humans. Natural phenomenon includes weather, decay, erosion and volcanic eruptions. Most natural phenomena are termed harmless.
Erosion is the process which leads to the removal of material from a section of the earth. Erosion may occur when solids such as rocks are weathered and transported to another place by wind, water, and ice (Toy, Foster, & Renard, 2002). Although soil erosion is a natural process human land use such as deforestation, industrial agriculture and urban sprawl have profound effect on erosion. A certain amount of ...

The invention of the scanning tunnelling microscope, in 1982 resulted in the emergence of a whole new category of microscopic techniques. All these techniques fall under the family of probe microscopy, which basically involves the interaction of a sample with the sharp tip of a probe at distances of the order of a few μm to a few nm. The atomic force microscope (AFM) is one such scanning probe microscope that builds an image that describes the surface topology of a sample based on the atomic forces of interaction between the tip of the probe and the sample surface. ...

Chapter 6 Review

1- Define Biaxial Weaving?
Biaxial Weaving is when the fiber tows that are brought together from two different sources on the loom. When the warp tows, they are unwound from the rack.2- Define Straight Grain and describe what can happen if the grain is not straight?
A quality woven fabric is a straight grain. If the yarns do not interlace at 90 degrees, it will result is the bowing or skewing of the fabrics. The fabrics that are bowed, tend to sag and the fabrics that are skewed, tend to produce a lopsided or crooked appearance. 3- What is ...

McConnell versus Grimes for United States Senate

- Introduction
When most Americans think about election time, they often refer to the Presidential election that occurs every four years. However, the outcomes of the United States midterm election most often affect Americans on an individual level compared to the outcomes of the Presidential race. Midterm elections are held every two years after the four-year Presidential election has occurred.
Virtually all United States Congress, including the House of Representatives and Senate, have seats up for grabs, and at least three-fourths of our 50 states will hold gubernatorial elections as well (Pfiffner and Davidson 254). It should ...

Product specification and customer’s satisfaction are the primary considerations for design and manufacturer of a table. When design for manufacturing principles is put in place through the design process, it affects all the aspects from the design phase all through to the production phase. The table I am going to design is a smart locker table with two compartment slots at the base. It is ideal for study or kitchen where small materials need to be kept during and after use. In this design, the following factors are considered until the final product is build;
- Cost control
...

Rapid prototyping is a set of various techniques that is usually used for fabricating a model or a sample using 3D computer aided design. The rapid prototyping allows prompt and effective collection of data necessary to produce a sample or a particular detail. Historically, the method was used to convert drawings into fabricated samples and details. However, the entire group of techniques is comparatively recent, as the first available options became available with the advancement and penetration of digital machines. The development in rapid prototyping is a result of progressing technological advancement and a high demand in machine tool ...

Introduction

Wireless networks have gained a lot of popularity in the world. With the development of many devices that make use of the wireless network, it is becoming evident that there are many organisaitons which have adopted the use of wireless networks and platforms in order to have effective communication media in their company infrastructure. This paper will focus on the use of antennas for wireless networks for companies and the way in which these wireless media have been used effectively in the companies to have effective communication.

An omnidirectional antenna is an antenna, either transmitting or receiving, which intercepts electromagnetic ...

Machining Technology is a manufacturing process that involves the foundational and basic principles about cutting via the application of various cutting tools. Despite the many modern technological advancement in this field of material science, it cannot be denied that there are the same principles involved both from the traditional and modern up-to-date techniques. Machining is the application of process used for shaping metals as shown in Figure 1.
Figure 1. Cross sectional view of the machining process.
The machining technology is applied in various work materials especially in the use of metals. It is used to shape and ...

One end application of sensors is in the food manufacturing industry. Modern packaging of consumer foods frequently uses Vertical Form Fill Seal (VFFS) packaging technology. A continuous flexible film with registration marks is used as packaging material. The packaging film is pulled through a collared tube and then filled with the product. These are the vertical forming and filling steps. It is then sealed and cut at the same time to produce finished goods in pouches. This is the sealing step.
Proper sequencing is needed in this application. This is facilitated with the use of sensors. A combination of ...

Joseph John Thompson is credited with the discovery of the electron. This was as a result of an experiment he conducted in 1897. Thomas discovered that Cathode rays, which were discovered by Philipp Lenard, could travel a lot further through air than is expected for a particle as small as an atom.
Thomas first produced cathode rays and passed them to a bell jar. Here, they were deflected by a magnet. The path of the rays was detected by their fluorescence on a screen placed in the bell jar. He performed this experiment with different materials as the anode and with different gases in ...

Summary

Supported on carbon particles using the high energy electron beam
Yuji Ohkubo, Masashi Shibata, Satoru Kageyama, Satoshi Seino, Takashi Nakagawa,Junichiro Kugai, Takao A. Yamamoto (2011) in their study of the Radiation-induced synthesis of Au–Pd nanoparticles of random alloy structure supported on carbon particles using the high energy electron beam found that Au-pd particle of ca 5-nm dispersed well on the carbon surface with ca. 30-nm without a significant agglomeration. Upon adding citric acid to the original solution, the resulting high pH was effective in the formation of alloy structures from the resulting bimetallic nanoparticles.
Using the irradiation ...

Introduction

The word “fiduciary” comes from the Latin word “fiducia”, which means “trust”. The term “fiduciary” is most often used to refer to a person or business that has the power and obligation to act on behalf of another person (called the beneficiary) against the background of total trust, honesty and good faith. Fiduciary duties of directors, officers and controlling shareholders play significant role in business and corporate governance, along with other duties, imposed on them by position. For the purposes of this assignment I would like to discuss fiduciary duties of directors, officers and controlling shareholders. The legislation of Ohio ...

Introduction

The term LASER is an abbreviation for “Light Amplification by Stimulated Emission of Radiation”. These are special devices that produce light that can be directed towards an object, and is monochromatic and coherent. These special characteristics are used in designing a laser device that is widely used for industrial purpose as well as in medicine . In the US, about 500,000 to 700,000 health care workers are involved in the use of medical lasers .

History and Progress of Lasers

The history of lasers dates back to 1916, when Albert Einstein discussed the possibility of stimulating radiant energy based on Niels Bohr’s theory that ...

Speed of Light

Armand H. Louis Fizeau
Armand H. Louis Fizeau was a famous French physicist. He was born in the city of Paris (France) on September 23, 1819. Louis’s earliest work was basically focused on improvements of photographic processes. In year 1849 by measuring speed of light he became the first one to have such measurements taken on earth. In this process he had used a narrow ray of light which was reflected by a mirror placed approximately eight kilometer away. He died on 18 September, 1896 at Venteuil .

Objective

The primary objective of this experiment was to measure the speed of light ...

Francesco Bassano’s "The Adoration of the Magi" presents a 16th century depiction of the birth of Jesus and the presentation of gifts to him by the wise men that is accounted in the Bible. The elegant dress of these individuals is made even more exotic by the the way that their bright colors are contrasted with the otherwise dim and dreary atmosphere. The magi, baby Jesus, and Mary are all the primary focus of the picture and demonstrate the homage that the wise men paid to the young savior. Oil on canvas was used in order to depict ...

The lights play a very significant role in driving a vehicle and are considered to be an essential element of every car. Lights provide a driver with a possibility to see in darkness while he is driving. If lights function right and are bright enough, then a driver is able to see what is in the road ahead. As opposite, if lights are poor, the risk of accident is much higher. Further in this essay I am going to describe and explain several reasons in detail, why it so important to drive with lights on. Different types of lights ...

Material Marble

Technique Doric
Parthenon: Gallery of Images
Description of the work of art.
The Parthenon which was constructed between 447-432 BC during the height of the Athenian Empire. It was a Doric style, post and lintel temple that was made up of a rectangular floor that had a series of low setting steps on each side. The Architects incorporated the Doric ration of 9:4. The Doric design also consisted of a series of Triglyphs and metopes that were situated on the entablature or the roof. The metopes were accompanied by a panel that was made up of a relief sculpture. ...

Solar Energy

Solar Energy Background
What can be more useful for humanity if not an unlimited power source, which we can use without any harm to the environment? Probably nothing, but solar power. Humanity has always tried to conquer the unlimited power of the sun – the history of solar technology dates back to the 7th Century B.C. and continues to this day. In the beginning, we tried to concentrate the sun’s heat by using glass, mirrors or other devices to light fires. From those times, we greatly progressed, but still we did not conquer this magnificent source of power.
Why ...

I agree with you that parabolas are everywhere in our life and rarely do we pay attention to see them. Apart from contact lenses, burning mirrors use the concept of parabolas. For parabolas, the optical property refers to the lines that are perpendicular to the directrix ‘bounce off’ and converges at the focus. Alternatively, the line from the focus may ‘bounce off’ the parabolas and travel perpendicularly to the directrix. These properties are useful in making the burning mirror. Moreover, the concept of parabola applies to car headlights. In this case, one places the bulb on the focus of ...

Solar Energy

What can be more useful for humanity if not unlimited power source, which we can use without any harm to the environment? Probably, nothing, but the solar power. Humanity has always tried to conquer the unlimited power of Sun – history of solar technology comes from the 7th Century B.C. to nowadays. In the beginning, we tried to concentrate the sun’s heat by using glass, mirrors or some other devices to light fires. From those times, we went far away, but still we did not conquer this magnificent source of power.
Why do we should develop solar power technologies? ...

Question one

An artificially generated smoke differs from a real smoke from the fire in that the artificial smoke has high velocity. Its pressure is measurable at in terms of few inches WG or some few kilopascals. The smoke is pressurized or passed through a pressured compartment or blowers and extended heat exchangers nozzles. Natural smoke from the fire on the other side has a low pressure of movement.

Question two

Concept Smoke generator is the machine or the device that generates the artificial smoke by heating the smoke chemical above its boiling point turning it into vapor. The concept generator is an ...

Elisha’s question about the father.

“And he took the mantle of Elijah that fell from him, and smote the waters, and said, Where is the Lord God of Elijah? and when he also had smitten the waters, they parted hither and thither: and Elisha went over”. (2Kings 2:14)
Elisha strikes the water twice. The first time nothing happens because he does it of his own accord. After he calls on the God of Elijah the water parts when he strikes it. This answers Elisha’s question of where is the God of Elijah. He is always there waiting for you to call on him.

Elisha’s question about the favor

“ ...

Solar power is a renewable source of energy, conversed of sunlight into electricity, directly using photovoltaics or indirectly using concentrated solar power. Photovoltaics were used to power small and medium applications, from watch and calculator to off-grid homes. This is an inexpensive source of electrical energy, and according to a new Fraunhofer report, solar power in sunny regions of the world is going to be cheaper from gas or coal. For several years worldwide growth of solar photovoltaics (further PV) raised in many countries and regions all over the world, including Australia, Canada, South Africa, and Thailand. The increasing ...

Compensations and benefits are factors that are offered in an organization for their employees. These payments strategies have been adopted by organizations so as to look out for employees’ well-being. It is important to know that the compensation managers are responsible to ensure that employees receive their wages for their hard work. On the other hand, benefit managers make sure that employees are rewarded for their work in terms of health insurance, retirement plans and other benefits. This paper will discuss some of the mandatory and voluntary compensation and benefits in an organization and why it is considered an ...

"Where Were You (When The World Stopped Turning)"

Where were you when the world stopped turning on that September day?Were you in the yard with your wife and children?Or working on some stage in L.A.?Did you stand there in shock at the sight of that black smokeRisin' against that blue sky?Did you shout out in anger, in fear for your neighbor?Or did you just sit down and cry?Did you weep for the children who lost their dear loved ones?And pray for the ones who don't know?Did you rejoice for the people who walked from the rubble?And sob for the ones left below?Did you burst out with pride ...

As sunshine moves through the atmosphere, it is impacted by air molecules, clouds and particulates, resulting in scattering of light. The extent to which light is dispersed by air molecules depends on the wavelength of the different inherent colors. Colors with shorter wavelengths are spread more than those with longer wavelengths. Blue is most susceptible to scattering thus explaining why the sky is blue. The visibility of light scattered by air molecules depends on the intensity of the light beam (University of Arizona).
On the other hand, when the atmosphere has matter like particulates and cloud drops, there ...

Nikola Tesla was physicist, inventor and electrical engineer in the late 19th and early 20th centuries. He was the inventor of the alternating current-rays and lights as well as the laser during his career of life. During this period, the Edison’s lamps were inefficient and weak when they were using direct current. The system of direct current had several limitations such as the system could be neither transported for long disturbances nor stepped up to high voltage for long distance transmission. In addition to that, the uses of direct current system need many sub-power stations which were costly. ...

“Hey, where’s the bread? I told you to get it yesterday!” yelled my elder brother at me. It was the same miserable morning that had greeted me for the past many years. It was as if every morning, my misery looked down upon me with a smirk and whispered, like the movie character Mask, “Somebody stops me!” I grabbed the money from the shelf, thrown to me like a bone is thrown to a dog and left my house in search of the ever-needed bread.
Usually, my journey to the bakery is very uneventful. However, that day, the monotony was ...

DRAG RACING

The drag race track event has some of the super champ drivers that run 120 mph in 11 seconds. Contestants board street cars and accelerate over 100-m parallel tracks to overcome the machines anti-spin electronics with immense skill adrenalin. Hundreds of drivers in drag race come to grace this event once they pass the weight, body style, and engine size test. The experience I had at the drag race made me realize that the motor sport provides a dual and a contradictory tussle for the racers. Drag racing entails motor sport racing using specialized automobiles. The race uses a straight course, popular ...

Abstract

1960s were the years of space exploration. During the entire decade, the USSR and the United States of America were competing in exploring the space. In the first part of the decade, it seemed that the USSR had the benefit. However, the second part of the decade changed everything. In 1969, the first men landed on the Moon – the Earth satellite. However, this is only an episode in the United States Moon exploration program. These were the first steps to land a human being on the Moon. The next step was taken the next year. In 1968, Frank Borman, James ...

Introduction

Evolution of technology relating to light brought about the laser science or laser physics. This physics of laser is a branch of optics which describes the main theory and practices of lasers. This science is majorly related to the quantom electronics, laser construction, optical cavity design, and e.t.c. There are various types or classifications which are based on the either the lasing medium, duration of laser emission, and hazards based. The of laser is based generally on the principle of adding energy to atoms or molecules so as to make it have a high - energy state, a term known as population ...

Introduction

Fourier analysis is a field of mathematics that studies how general functions can be approximated or represented by the addition of simple trigonometric functions. Fourier analysis is named after a man who proved that representing a mathematical function in the form of a sum of a trigonometric function simplifies the inquiry into heat propagation. Joseph Fourier envisioned the Fourier series, a concept from which Fourier analysis grew. Presently, vast spectrums of mathematics involve Fourier analysis as a subject. The subject spans through the field of engineering and sciences. In these two fields, Fourier analysis involves the process through which a function is decomposed into simpler functions. The ...

Abstract

Microscopy is the science of viewing objects that are very minute and can only be viewed by an instrument called a microscope. The science began in the 16th century and has been progressing into viewing specimens at higher resolutions, greater magnifications, and in 3-D. These advancements are in the three sub-branches of microscopy which are scanning-probe, optical, and electron microscopy. The paper analyses the latest advancements in the three fields indicating what the invented microscopes can be used in science.

Introduction

In Biology, Microscopy is the technique of using microscopes to view objects that are very minute and can only be ...