Free Tipping Bike Trailer Essay Example

Fabrications of bike tipping trailers entail several materials and processes that are performed in specific sequence. The first step entails the installation of the steel trailer kit. Some of the basic components of this trailer include; the steel trailer kit, frame of the box and the box, the trailer wood support, hydraulic jacks, door hinges, steel brackets and aluminum connectors to the bike. It is imperative to ensure that all the components needed for the fabrication of the tipping bike trailer are is the required condition before the assembly and fabrication process is started. Different tipping bike trailers require different components depending on the amount and size of load the trailer is expected to carry. The tipping bike trailer in question is expected to carry a maximum load of 1060 lb. Installation of the steel trailer kit is the first step in the fabrication process of this tipping bike trailer.
The second process entails making of the box frame and the box itself. The fabrication of box frame and box involves the use of two woods supports which measures 47 inches in length and 1.75 inches in thickness. Additionally, the frame will utilize six supports which measures 22 inches in length and a thickness of 1.75 inches. Apart from the two wood supports and the six wood supports, the process will utilize additional two supports for the middle section. The middle wood supports measures 30.5 inches in length and a thickness of 1.75. It is imperative to note that the thickness of all the support wood used for the frame and the box is the same and consistent. After the box frame has been made using he cut pieces of support wood, the box is made using sheets of wood. The sheets are cut according to the measurements so as to correctly fit onto the designed frame. Different sheets of cut wood are installed in their appropriate section of the frame to make a box as illustrated in the pictures.
The third process involves fabrication of the trailer wood support. The trailer wood support is used to provide balance between the box and the hydraulic jack that is installed in front of the box as illustrated below. The trailer wood support is fabricated using a total of four wood supports. Two of the four wood supports are designed to a length of 24.75 inches and 1.75 inches in thickness. The remaining two wood supports are fabricated to a length of 40 inches and 1.75 inches in thickness.
The hydraulic jack offers the tipping bike trailer with the needed hydraulics to perform its purpose. It is installed after the box and the trailer support has been fabricated. The hydraulic jack in configured in the top front center of the steel kit trailer. The installed hydraulic jack is capable of raising the trailer by 9.2 inches. It is configured with a battery that is installed in the next position. The hydraulic jack is controlled by a remote which can be used to rise and lower it as desired. After the hydraulic jack has been installed, the process is followed by the installation of the door hinges. The door hinges are installed at the top position to allow the door to easy swing open as the trailer tips over.
Next, six steel brackets are drilled into the steel trailer so as to hold the box in position and prevent it from slipping and sliding. Aluminum connector to the bike is installed through welding. Three aluminum tube bars are welded together in form of Z shape. The connector is used to link the bike and towing the tipping trailer. Three aluminum tubes are used for this process: 24 inches aluminum tube which is used to connect to the trailer; 11 inches horizontal aluminum tube; and 22 inches aluminum tube connected vertically to the tube. It is linked to the bike’s seat through the use of a snap hook clip.