Introduction
Waste biomass is usually in the form of manure, agricultural residues, municipal sewage sludge, municipal solid waste, and industrial bio-sludge which can be converted to animal feeds, alcohol fuels or industrial chemicals. There are various processes which are employed to convert this waste into the respective useful end products rather than being dumped away. The complexity of these processes depends on the kind of technologies being used. Conversions of waste biomass into renewable energy forms play a major role in reducing the dependence on crude oil and thus promote economic growth. The process of waste biomass conversion to useful products has a positive effect on the environment because the renewable biomass recourse is effectively utilized minimizing pollution and cost effects incurred in disposing these wastes. These wastes are considered important and the process of producing usable products from them enhances the concept of renewal energy. Biomass processing is environmental friendly and therefore it is highly recommended as the future industry of production especially energy production.
The chemical process of converting waste biomass in the form of agricultural residues such as straw, bagasse, and Stover to animal feed starts by mixing the waste with lime. The treatment of this biomass with lime is very essential because it makes it more digestible and can thus be fed to ruminant animals. The lime renders the agricultural waste biomass more digestible by the rumen microorganisms and thus can be used as a replacement for grain feeds. The use of these biomass products as feeds promotes saving since the waste products are renewed. It is a process that is cost effective as well as environmental friendly. The overall performance of animals’ health is higher as compared to the use of grain feeds since lime is an additive that promotes born formation (Holtzapple, 1).
Alternatively, the agricultural residues treated with lime can be converted into industrial chemicals such as ketones, acetic, propionic, and butyric acids, or alcohols such as propanol, pentanol, and butanol. These conversions follow certain procedural steps; the first one involves the feeding of the lime-mixed waste to an anaerobic fermentation chamber. Inside this fermenter, the materials which are rendered more digestible are broken down to volatile fatty acids and salts such as calcium butyrate, propionate, and acetate (Holtzapple, 1). Limestone is particularly applied in the fermentor to neutralize the volatile fatty acids produced in order to prevent the PH from going too low, and thus the production of the calcium VFA salts. Once the volatile fatty acids have been obtained, the second step involves concentration and then either of three steps namely, thermal conversion, hydrogenation or acidification can be undertaken to obtain either chemicals or fuels.
The acidification process of the concentrated volatile fatty acid salts yields to butyric, acetic, and propionic acid as the products. The second option involves thermal conversion of the concentrated volatile fatty acid salts at 430 degrees Celsius to release ketones such as Acetone, Methyl ethyl ketone, and Diethyl ketone (Holtzapple, 1). Alternatively, the concentrated volatile fatty acid salts may be exposed through the hydrogenation route whereby they are converted to alcohols such as propanol, butanol and pentanol. According to Holtzapple (3), the hydrogenation process is carried out with the aid of 200-g/L Raney nickel catalyst. The chemicals obtained after these processes such as the acidifying agents, and calcium salts can be readily recycled and used back in the conversion process, thus reducing any chances of generating wastes.
These processes help to conserve the environment because the conversion of agricultural residue to animal feeds replaces the use of grain feeds which are cultivated with fertilizers. Cultivation of these feeds contributes to pollution of water sources through infiltration of the dissolved fertilizer in underground water, herbicides, as well as soil erosion (Holtzapple 3). Replacing these feeds with the lime-treated, easily digestible agricultural residues saves high costs of production, besides its environmental-friendly nature. In addition, Fertilizers are rich in elements of nitrogen and calcium which makes the soils to have better absorbance. Pollution is reduced to a higher extent if the use of these feeds is employe (Singh and Steven 235).
Waste biomass contains enormous amounts of electrical energy, which if properly harnessed may be used to supplement or replace the use of crude oil energy and save huge costs. These forms of energy which can be derived from waste biomass comprise of “process heat, steam, motive power, and electricity, as well as liquid fuels”, (Crocker and Crofcheck, 1). Biomass is the perfect substitute for fossil fuels given its qualities of being a large natural renewable carbon resource and its cheap availability. Rather than disposing off the lignocellulosic biomass, it can be used as feed stocks for producing alternative energy forms such as biodiesel. Adoption of the microbial electrochemical technologies that utilize microbes as catalysts for various electrochemical reactions that yield electrical power provides a prime opportunity for harnessing the energy in waste biomass for constructive uses (Logan and Rabaey 1). The microbial fuel cells are examples of these reactions capable of generating electrical power.
The microbial electrochemical technologies involve the process of generating electricity using exoelectrogenic microorganisms with waste biomass acting as the fuel and oxygen as an oxidizer for the aerobic respiration of the bacteria. These microbes have the capacity of transferring “electrons outside the cell to insoluble electron acceptors like iron and other metal oxides, or to electrodes in bio-electrochemical systems” (Logan and Rabaey 1). Within the microbial fuel cells, the exoelectrogenic bacteria transfer electrons to the anode and protons into the solution, thus amounting to a negative potential at the anode of approximately -0.2 volts. This anode potential has a slightly higher voltage than that of the substrate’s half-cell reaction. On the cathode side, oxygen is usually used as an oxidizer (He, Zhang, Funk , Riskowski and Yin 4).
Combustion of the biomass is another process used to produce electricity and heat. The whole process involves the burning of biomass in a boiler with limited supply of oxygen to produce high-pressure steam. The produced steam is then directed through a number of turbine blades. Due to its high pressure, it makes the turbine rotate. This is in turn is joined to electricity generator which is made to turn by the steam and therefore produces electricity. This is one of the best ways of utilizing biomass wastes since production of electricity through this method is environmental friendly as compared to use of fossil fuels which emit carbon dioxide gases that are not friendly to the environment (He, Zhang, Funk , Riskowski and Yin 4).
Another use of biomass is the generation and production of gasoline and Jet fuels. The agricultural wastes from plants are converted to levulinic acid and formic acid through the process developed in the Wisconsin university. In this process, cellulose which is a large component of biomass is broken down by the use acids to form simple sugars (He, Zhang, Funk , Riskowski and Yin 4). Micro-organisms are then involved in the process of further converting the simple sugars to liquid fuels. Due to the use of acids in breaking down cellulose, thee final product is the formation of levulinic acid and the formic acid. These chemicals are then combined through a chemical reaction which involves the use of energy and form a product known as gamma-valerolactone. This industrial chemical is then converted butane by a catalyst made of silica and alumina. The butane gas is then converted to liquid hydrocarbons which are mainly the energy fuels that can be used as jet fuels. The process is said to be environmental friendly since it is possible to capture the carbon dioxide gas produced during the production of these fuels. This will in turn be used in other processes hence economical (Bridgwater and Boocock 12).
Hydrothermal gasification chemistry of biomass involves the breaking down of lignin resulting in the formation of phenols and aromatics. Under this process, glycosidic bonds in cellulose tend to hydrolyze fast. With the use of catalysts, the final product can be a gas or liquid depending on other factors such temperature. If the temperatures are above the critical point, hydrolysis products are formed since the glucose decomposition is slowed. The formation of hydrolysis products enhances the liquefaction of the gas product (Crocker 212).
It must be noted that the production of hydrogen in biomass reactions is and endothermic process. The biomass content reacts in the presence of water under the gasification process to produce hydrogen gas and carbon dioxide. The production these gases is enhanced if the feed stocks being used are rich in hydrogen content. Water also reacts with the biomass contents and releases the hydrogen part of the molecule. The hydrogen produced can be used in formation of bombs and gas fuels. It can also be used in lifting weights since it is lighter than air (Paul, Etienne, Yu Liu and Wiley 367).
Biomass derived-intermediate compounds have been found to produces syngas which is a mixture of carbon monoxide gas and hydrogen gas. The reaction that produces this syngas takes place under the uncatalyzed conditions of gasification (Singh, Jasvinder and Gu 68). The cellulose and lignin are converted through intermediary reactions such as hydrolysis, thermal decomposition, methanation, steam reforming and water gas shift. The significance of this process is that it takes a shorter duration to produce hydrogen. It is also economical since it is endothermic requiring little energy. It is the maximization of the waste products such as sludge, animal wastes, manure, agricultural residues, municipal sewage sludge, municipal solid waste, and industrial bio-sludge that helps in production of hydrogen which has a wide range of applications (Bullis Para. 3.).
Lignin is the major component compound of biomass and its usage is wide and important in waste management. For instance, it has been noted that lignin decomposes in a hydrothermal environment. In this process, low molecular weight compounds are formed which include syringols, catechols and guaiacols. These are then converted to formaldehyde and alkylphenols through the process of condensation. It is then at this stage that hydrogen production is enhanced by the use of catalysts such as nickel and sodium hydroxide compounds. The low molecular weight compounds formed are easily converted to hydrogen as a result of catalysis. These processes are economical and can produce gases that can be used in a range of applications (Singh, Jasvinder and Gu 68).
Conclusion
In summary, the chemical processes involved in production of energy, and other useful products from biomass are quite a number. They are environmental friendly and cost effective as well as efficient. Waste biomass is usually in the form of manure, agricultural residues, municipal sewage sludge, municipal solid waste, and industrial bio-sludge which are converted to animal feeds, alcohol fuels or industrial chemicals. The processes employed to convert this waste into the respective useful end products require skills and some knowledge but are very economical. The complexity of these processes depends on the kind of technologies being used. Conversions of waste biomass into renewable energy forms play a major role in reducing the dependence on crude oil and thus promote economic growth. The process of waste biomass conversion to useful products has a positive effect on the environment because the renewable biomass recourse is effectively utilized minimizing pollution and cost effects incurred in disposing these wastes. It is therefore important to note that wastes should be managed in order to avoid pollution. The chemical processes of converting biomass to useful products are easy and cost effective and therefore they should be employed in order to avoid pollution of the environment.
Works cited:
Bridgwater and Boocock. Bioenergy Developments in Thermochemical Biomass Conversion. London: Blackie Academic & Professional, 1997.
Bullis, Kevin. From Waste Biomass to Jet Fuel, 25 Feb. 2010. Web. 26 Nov. 2012.
CAER, ENERGIA Vol 16. University of kentucky, center for applied energy research. 2006; website- http://www.caer.uky.edu/energeia/PDF/vol17_62.pdf
Crocker, Mark. Thermochemical Conversion of Biomass to Liquid Fuels and Chemicals. Cambridge: Royal Society of Chemistry, 2010. Print.
He, B. J., Y. Zhang, T. L. Funk , G. L. Riskowski and Y. Yin “Thermochemical conversion of swine manure: an alternative process for waste treatment and renewable energy production.” American Society of Agricultural Engineers. 43.6 (2000): 1827-1833. Web. 26 Nov. 2012.
Logan, Bruce E. & Rabaey, Korneel. Conversion of Wastes into Bioelectricity and Chemicals by Using Microbial Electrochemical Technologies. Science vol 337. 2012. Web. 26 Nov. 2012.
Mark Crocker and Czarena Crofcheck. Biomass conversion to liquid fuels and chemicals.
Mark Holtzapple. Conversion of Waste Biomass to animal feed, fuels and chemicals. website; http://tammi.tamu.edu/Holtzapp2.pdf
Paul, Etienne, Yu Liu and Wiley. Biological sludge minimization and biomaterials/bioenergy recovery technologies. Hoboken, NJ: Wiley, 2012. Print.
Singh, Jasvinder and Sai Gu “Biomass conversion to energy in India—A critique.” Renewable and Sustainable Energy Reviews 14 (2010): 1367–1378. Web. 26 Nov. 2012.
Singh, Om V and Steven P Harvey. Sustainable biotechnology: sources of renewable energy. Dordrecht: Springer, 2010. Print.
Singh, Om V. and Steven P. Harvey. Sustainable Biotechnology. Springer Netherlands, 2010. Print.
