Ball Reports Samples For Students

There are several ways to improve the volley ball serve and increase the likelihood that it will result in an ace or a serve that cannot be returned and results in a point for the offensive team. The main goal when seeking to increase the likelihood that a serve results in an ace is to minimize the time the ball spends in the air and increase the speed of the ball. This will reduce the amount of time the opposing team has to react, forcing them to react faster than their normal reaction time would dictate. In this analysis of the kinematics ...

Real time kinematic of volley ball

There is several ways to improve the volley ball serve, that is time spend on air should be reduced. Due to this there won’t be any time to react for the opponent team. This will make the opponent team to react faster than the normal one. In this analysis of kinematic of volley ball, the ball spends in air should be reduced, when the serve of volley ball is made.
In order to setup the analysis of kinematic of volley ball, we should consider several variables in the analysis. The schematic diagram will show the top view ...

Experiment 4: Projectile Motion

Introduction:
Projectile motion is a special type of motion involves two components of motion – horizontal and vertical. But motions in two directions are independent of each other. Flight of ball is an example of projectile motion. This two dimensional motion can be determined as two linear motions in two mutually perpendicular directions –one along horizontal direction and the other one along vertical direction. Projectile motion can be analyzed with the help of equations of motion. Vector equations and vector rules are generally used as the motion occurs in two dimensions. Gravity force has primary importance in projectile motion. Effect ...

Research Paper

Introduction 3

Relationship between resource utilization and forecasting (effective forecasting and predicting) 5
Economy of UAE 5
Hotel Industry of UAE 6
Tourism Sector in Abu Dhabi 7
Application of effective forecasting and predicting in the Hospitality Industry 7

References 8

Appendix (1) 10
Interview questions 10
Appendix (2) 11
Questionnaire 11
Introduction
The events such as globalization and technology development have increased the competition in every business segment and thus managers in organizations need to plan innovative practices so as to develop the ability to manage business processes effectively and predict ...

Abstract

The aim of the experiment was to determine the relationship between the diameter of a steel ball and its terminal velocity in glycerol. Four balls with different diameters were put in a transparent cylinder full of glycerol. The velocity of the ball was calculated based on the time taken for the ball to pass from one mark on the cylinder to another. The results showed that an increase in the diameter of the steel ball leads to an increase in terminal velocity. Besides, the results show that the larger the diameter of the steel ball is, the faster the ...

Abstract

The objective of this laboratory experiment is to examine the qualities of projectile motion. Considering the movement of a steel ball in the horizontal plane, the initial velocity that is possessed by the steel ball can be ascertained from the assessed range. Considering the assumed initial velocity of the steel ball, the range of the projectile will be assessed for a variety of initial angles. The initial angles and will be computed by the application of the theory with regards to motion for constant acceleration.

THEORY

Considering a given initial speed demonstrated by v0→, with an initial velocity demonstrated by s0→ that is ...

Introduction

When a ball rolls off a table, gravity will act on it and pull it down towards the ground. While the ball is rolling over the table, it has an initial velocity that is horizontal in direction before it leaves the table. As it leaves the table and gravity starts acting on the ball, it will follow a parabolic trajectory as shown in the following figure.
Figure 1 : Ball Rolling Off a Table Path of Motion
The first problem is how to find where the ball will bounce off the ground the first time. The second problem is ...

Abstract

This report acknowledges the various properties associated with plastics and their behaviour when subjected to different conditions of loading. This experiment investigates the mechanical behaviour of five types of polymers which include Silly putty, six pack rings, nylon cable ties, Ply Doh, and Splat Ball. The properties of plastics can be altered to introduce cross-links and thereby introducing constraints to prevent sliding or rotation. The findings of the experiment concluded that temperatures, speed of loading and chemical composition of plastics are determinants of their mechanical behaviours.

Introduction

Polymers play a critical part in day-to-day life as manifested in the numerous applications. ...

Introduction

The skills that a person acquires in a sports or any fitness program can generally be subdivided into these three, according to the degree of experience or expertise: beginner, intermediate, and expert. All skills and techniques that an individual can learn about a particular sport can fall under any of these three depending of course on the degree of difficulty in performing the activity and other factors such as its effectiveness on the playing field. The objective of this paper is to create a comprehensive comparison between the three different types of athlete: novice, intermediate, and expert and how each type of athlete ...

History of Golf

Golf originated in Scotland more than 500 years ago. Most of the early records on golf are Scottish official records to ban it or to criticize those who played it (Clark, 1875). James II of Scotland banned golf in 1457 because it interfered with archery practice by the Scottish guards. It is believed that shepherds tending flocks of sheep near St. Andrews started golf; by hitting stones into rabbit holes with their wooden crooks when they got bored (Browning, 1955).

The Royal and Ancient Golf Club of St. Andrews was founded in 1834 (Clark, 1875).). By the end of ...

Control valves are an important gadget in engineering and the building of structures. Virtually, there are thousands of loops that determine how machines operate. Fundamentally, a valve controls the thermodynamic flow of fluid through regulation of fluid volume and speed. In essence, material flow at every point in the loop is the control using a control valve. In the engineering, there are fluid loops that contain energy transmission fluids, as well as loops containing different materials related to the nature of the end product manufactured. As a matter of fact, besides the structural characteristics that a control valve possesses, there are numerous accessories ...

Football is one of the world’s most watched sports with most players dedicated to win the eye of their coaches. For that reason, most players work hard in the training sessions to ensure they get the first team chances. Mostly, the demands for football are influenced by the match analysis and the psychological measurements during the play. The myriad of factors affects the needs of a player that include the player’s physical capacity, technical qualities, playing the position, tactical role, and style of playing (Randers, et al., 2010, PP18). Moreover, the ball possession, the opponent strength, importance ...

Abstract

In an ecosystem, the existence of any species of animals or plants solely depends on the capability to adapt to its environment. This is true because, those species which are poorly adapted become extinct. For example, trees that could not adapt to harsh conditions of the desert were eliminated and those species that were well adapted were spared. This is basically what is called natural selection (Jeff et al 9). Similarly, those animal species that could not adapt to any given environmental conditions of an ecosystem were easily eliminated out of existence.
Human being, on the other hand, ...

Basketball is amongst the popular sports played and watched in the world. It is a team oriented sport that involves two to five members trying to score points against each other by throwing a ball through a high hoop (Page, 2000). The game requires running back and forth in a two-sided court. It involves jumping, arm movements through dribbling, throwing, catching, and blocking. All these activities paired with the amount of time that the game takes during competitions lead to deep cardiovascular activity.
Watching basketball tournaments may be enjoyable, but not as amusing as enjoyable as playing the game. Health-wise basketball enhances ...

Legal research

Introduction
Every business should abide by the business laws to remain competitive and relevant. Particularly, concepts surrounding the law of contracts, torts, and employment law guide most conflicts occurring in businesses today. However, businesses are faced with challenging situations that require precise understanding and interpretation of different commercial case laws and concepts. The lack of understanding of these basic concepts may cause businesses to suffer legal consequences arising from frequent litigations (Singh, 2007). The current paper analyses three events that happened at Wicked Theatres Group Ltd.’s theater. In doing so, the paper sheds light on the legal principles ...

Ryan Gleason

Salem Almansoori
Introduction
Ballistic pendulum as illustrated in Figure 1 below is a classical method of measuring the speed of bullets. This technique, which is commonly used in investigation of bullet speeds, relies heavily on the basic laws of conservation in physics.
Figure 1 Ballistic Pendulum Set-up
Figure 2 illustrates how the experiment is executed chronologically from the time the ‘bullet’ is launched to the time it ceases travelling at the maximum angular displacement. In the illustration, the bullet of mass, m and initial velocity, v hits a stationary pendulum cup and it is embedded in it ...

Falling Ball Viscometer

- Objective
The intent of this experiment is to find the dynamic viscosity of Glycerol by following falling ball viscometer method. Multiple steel spheres will be used to fall down the liquid and the time taken to fall a specific distance will be measured.
- Background
A body falling in a liquid is subjected to gravitational, buoyancy and drag forces which results in the achievement of a terminal velocity of the fall. According to Archimedes principle, we know that buoyant force is equal to weight of the displaced liquid. Implementing these principles, we get following equations, which result in ...

Falling Ball Viscometer

Objective:
Purpose of the Falling Ball Viscometer experiment was to measure the viscosity of glycerin or glycerol by using falling ball viscometer technique.

Background:

When a body falls in a liquid under the force of gravity, it accelerates until weight of the body is balanced by the buoyancy force and drag force. Terminal velocity is gained by the body at this point. Viscosity of the liquid can be evaluated by measuring this terminal velocity of the body in the liquid.
In this experiment a steel sphere was allowed to fall in glycerol and dynamic viscosity of glycerol was measured by using ...

Section SLN:

TA’s name:
I. Objectives
- Measure the motion of a Simple Pendulum using a motion detector and record position v/s time by computer.
- Investigate how the period varies with the amplitude.
- Analyze the motion to determine damping constant and quality factor.
II. Data

Undamped oscillations – tennis ball

Slope of T2 vs. L plot = 4.923 +/- 0.2372 s2/m

Make a bar graph in GA to observe the relationship between period and amplitude.

Damped oscillations – Styrofoam ball
III. Data Analysis

Period of oscillations as a function of the pendulum length

- Based on the slope of T2 vs. L plot the experimental gravitational acceleration was calculated as follows:
The slope of the graph is calculated to be 4.923.

Now, we know that,

Slope = 42/g

Therefore,

...

This book is so captivating because I found a lot of interesting sections that kept me keep on reading and analyzing it. However, the most interesting thing I learnt in this book is the commitments of the leading protagonists: Joe Ehrmann and Jeffrey Marx. These are two former friends who have been together for more than four decades now. What perplex me most are their amazing perceptions towards life. Even if they have taken different paths of life now, they shame a similar world view and are out to positively transform the lives of the youths.
It was so interesting ...

Adidas is the leading marketer and producer of sportswear while facing competition from rival, Nike. The company’s remarkable marketing strategies have been as a result of modern and new technologies, especially in advertising. The organization targets consumers from all over the world making its advertisement strategies a major part of their marketing. Adidas has managed to keep up with the challenging consumer demand over the years due to the approaches used in their advertisements. For most of their adverts, the use the motivation and learning concept to attract the consumers who can easily relate with the advert.
2015 ...

Introduction

Group D has been tasked to deliver a concept ideation report explaining the reasoning behind the chosen concept that will be constructed to achieve the goal set out in the Warman Design & Build Challenge 2016. This concept ideation report has been completed in order to reduce the likelihood of error in specifications and function, manage costs, mitigate risks, and evaluate the expected success of the final concept. [1]
This report explains the approach and principles utilised by group D to create a comprehensive design. The principles utilized will include: The Development of Product Specifications, Development of Functional Analysis and ...

1. The average values of hi, hf, y, and X were found to be:
hi = 5 cm
hf = 15.87 cm
y = 104.84 cm
X = 310.235 cm
2. h = 15.87 – 5 = 10.87 cm
3. Using equation (10) to determine the initial velocity and equation (11) to determine initial momentum, we find
vi = 3.10235*sqrt(9.81/2*1.0484) = 7.035 m/s
pi = 0.06944*7.035 = 0.4885 kg m/s
4. Using equation (7) to calculate the final momentum of the system, we find
pf = (M + m)*sqrt(2*g*h)
pf = 0.3321*sqrt(2* ...

Lab partner's name:

TA’s name:
Section no
Objective:
Purpose of this experiment was to check conservation of energy in three simple mechanical systems namely swinging pendulum, oscillating mass on a spring and basketball shot.

Data:

Following is the table of experimental data for Swinging Pendulum system

Following graphs have been obtained from above experimental data.

Graph -1: Kinetic energy vs Vertical Direction
Graph -2: ME.PE,KE vs time
Following is the graph of experimental data for Oscillating spring-mass system
Graph -3: ME.PE,KE vs time
Following is the table of experimental data for Basketball shot

Following graphs were obtained from above experimental data.

Graph -4: ME.PE,KE vs time
...

- Abstract
- Construction is an essential factor in the progress of the human civilization. It is in the construction industry that our infrastructure depends upon. The construction life cycle has several phases in it, one of these phases is the design phase. Before the advancement in computing technology - the invention of modern computers - construction engineers do manual designs; that is, through pencil and paper. This method of designing has become unfit as larger more complicated infrastructures and engineering designs develop. Hence, the need for a tool that will help construction engineers in the design phase. On ...

Introduction

In any collision, where the system is not subject to external forces, linear momentum will be conserved. In case the collision is elastic, kinetic energy will also be conserved. In this experiment, two steel balls were made to collide momentarily, and the projection of their 2D collision dynamics was recorded for analysis. The vectors measured using the carbon paper, are related to the momenta of the balls before and after collision. These were used in the respective equations to verify linear momentum conservation and elastic collision, i.e. kinetic energy conservation.

Data Analysis

Sample Calculations
xi = 67 cm; xt’ = 61.5 cm; ...

Take Home Experiment Report

Observations: I dissolved as much of the borax as possible in 500 ml of water. I added the glue and stirred. A solid ball formed that when squeezed more glue would come out. Putting it back in the water and working it in would make more solid. After kneading the solid, I could form it into a ball that bounced. The amount of water went down about 10 ml.
Partner Identity, Reactions, and Questions: My lab partner was my mom. Both of us were surprised that the gooey solid was formed from glue and a liquid. It was strange to ...

Introduction

The increasing use of electronic devices like mobiles and laptop has necessitated the constant supply of power. A power bank is increasingly becoming a ‘must have’ for people on the move. Kazam Mobile, the startup mobile company has come up with its Kazam Power Bank (KPB) which can power the batteries in use in mobiles and laptops.
This report starts with the corporate objectives of Kazam. This is followed by a market overview of the power bank market in the UK. An internal and external audit of the market would be presented thereafter. The assumptions for the power bank ...

The viability of all the concepts that were brainstormed were all checked out and all the differences and advantages were put into consideration. The environment and the work suitability was checked together with the required specifications that each concept brought into place. Decision matrices were used to outline the suitability of the selected concept. Notably, concept B was the most preferred. Some of its advantages that made it a better choice over the other concepts was due to its security payload, speed indicators and stability. Therefore, concept B is expected to show better results in the Development of Product ...

(Name of author)

Introduction

The history of football may be traced back to China in second century B.C. The sport was introduced in England in 1170 and was banned a couple of times between the 1400s and 1600s because it was associated with peasants and was thought to promote violence and immorality (FIFA, 2000). However, the sport later re-emerged and transcended social divide to become England’s favourite sport. The English have been considered to be very influential in popularizing football across the world. In 1867, the first football match outside Europe was recorded; the idea was initiated by several ...

Middle Eastern Cuisine is known for its rich flavors, and unique spices. Perhaps the most common diches include Hummus and Falafel as featured at the Hummus Blog, both made from chickpeas, as described in detail at Humus 101 (2015). Another major staple in Middle Eastern foods, however is lamb. One popular and well spiced lamb dish is Kofta Kebabs These kababs are made with six different spices, giving them a rich and distinct smell, and deep flavor that hits every area of the pallet. They are among the fastest, easiest, most unforgettable lamb dishes I have ever tried, and ...

Introduction

Beaver Tails is a Canadian business specializing in hand made pastries, snacks and sweets. The company is currently operating in four countries namely Canada, USA, Japan and South Korea. The head office of the company is in Montreal, Canada. The business is aspiring to pursue an international business strategy for the growth. The increasing trend of globalization and increased competition has forced the business to consider the expansion into the Europe. Europe is home to the fashion industry with many tourism sites and attractions. The country selected for the expansion is Switzerland. This report addresses the various issues related ...

Biology

Abstract
Paternity test is usually performed to individuals, where their DNA are compared to other people DNA to see if these people or person, is parent to the individual or are related. The method involves use of restriction enzymes to cut DNA from samples, which are then analyzed using gel electrophoresis. Gel electrophoresis will separate the DNA according to size and charge. They will be viewed on gel as bands. Normally, the DNA patterns are usually unique for an individual. Therefore, if there is a match is patterns from the analyzed samples, then there exists close relationship between two ...

Evaluation of Marketing Strategy

Introduction4
The brand.4
The organizational strategy.5
Strengths of the marketing strategy..6
Weaknesses of the marketing strategy..8
Marketing mix..8
Product..8
Price..9

Place.9

Promotion.9
Conclusion10
Appendices10
Appendix 1: SWOT Analysis..11
Appendix 2: PESTELEL Analysis..11
Appendix 3: Michael Porter’s Five Forces Analysis12
References List ..13
Executive summary
Nike, Inc. is a leading manufacturer of footwear, apparel and equipment globally. The company has enjoyed a long history of success due its consistent marketing strategy that gives it a competitive advantage. Nike uses a various strategies to maintain its lead in the vast global market. This study assesses the effectiveness of the marketing strategy ...

Personal Improvement Process

Vision/mission statements
The main goal I am determined to achieve is the correction and improvement of homework delivery process due to my usual lateness in this field, thus the vision statement is to improve timing of my homework delivery.
At first, it is necessary to create the system of values, principles, standards, according to which I will be acting as well as measuring the effectiveness my activity, namely the mission statements (Talbot 2003). The following mission statements, aimed at proper regulation of homework delivery process, can be set:

The tasks I am given are to be finished as soon ...

Introduction

This experiment is about the experimental measurement of the density of different substances using laboratory measuring equipment. The four measuring equipment used are the following: the digital caliper, the digital micrometer, the traditional platform balance, and the digital scale. The first two instruments are for measuring length; the last two are for measuring mass. These instruments have varying levels of precision and will be used accordingly as needed in the experiment. The dimensions of the substance will be measured using length instruments; after finding the dimensions, the volume of the substance can be computed based on the type of ...

Version control systems

Introduction
There are different version control systems which have been developed to be used in managing software development projects. The choice of the version control will depend on the model and the workflow of the projects and the nature of organizational workflow that is supported. It is important to understand the requirements of the organization which will use the version control. This will determine the way the version control will suit and align with the goals of the developers. Before a choice is made, it is important to have clear view of the requirements of the organization. This paper ...

Introduction

Music has no boundaries and is listened by all sections of society, globally. Whether it is in English, German, French, Hindi, Mandarin, Arabic, Urdu, or any other language, music is enjoyed by one and all for its sheer power of attraction. It is not necessary that all audiences like the same kind of music, and it is also not true that all artists are liked by all. Tastes differ, and preferences are many. While some would pledge their hardcore support for the songs sung by Madonna, or a Lady Gaga, they need not necessarily have to agree that they are ...

Introduction

A pendulum consists of a bob or point mass which is suspended from a light string tied at one end to a pivot point. The string is assumed to have negligible mass.1 If the point mass of the pendulum is pulled to a small angle from vertical plane and released, it will swing back-and-forth at a regular period and frequency. Time taken by the pendulum to make one full back-and-forth swing is termed as period of a pendulum. If the amplitude of motion or swing is small, motion of a simple pendulum is like simple harmonic motion and can be approximated by

Above equation is used ...

Brand Equity Management

Part One: Introduction
One of the key reasons behind the success of a business is a strong brand image or building brand equity. The main rationale behind building brand equity is because it serves as a basis for business success and also helps assists in offsetting stiff competition by letting brands to maintain high pricing, differentiating the product, and enjoying loyal set of customers. Explaining in short what makes such a brand, on the other hand, is not as straightforward a task as saying what a brand should bring about (Carman, 1990). Notably, the outlook of a brand is primarily associated with an identity, a name, a symbol ...

Preliminary parts Pagea) Title page....1b) Transmittal..3c) Table of contents....2d) Executive summary.42) Report texta) Introduction.5b) Problem Statement..5c) Method Used5d) Findings..8
e) Recommendations..9f) Analysis...9g) Conclusion93) Addendaa) References11b) Appendices.12

Transmittal Form

I am writing this report to give you more information about the high pricing policies adopted by the restaurants selling food products such as burgers, hotdogs, pretzels, popcorn, cheese steaks and beers in sports venues. It has become one of the leading fast food manufacturing companies in USA. It has several outlets which are spread across the country. These are offering its highly valued and popular fast food dishes to its customers.
...

IntroductionSafe space or positive space are terms used to show that an educator does not allow harassment of students on the basis of race, sex, cultural background, religion , physical or mental ability and thereby creating a safe environment for lesbians, gay, bisexuals, and transgender. This is a place where everyone feels free to freely express oneself and individuals uphold dignity and respect. On the other hand, organizations with unsafe space are those, which do not embrace diversity but rather discriminate students based on sexual orientation. This report uses the excerpt “Ronan’s Escape” a story of 14-year-old boy in Western Australia to ...

REPORT: Landscape Planning and Ecological Management: Plantation of bare root common trees.

Introduction
We often take trees and other flora, all around us, for granted maybe because almost all of us have seen trees and captured the word and their image deep inside our sub-consciousness. As we grow up, we learn about the benefits and advantages of trees parrot-fashion. No person or entity teaches us anything about the aesthetics so when we see captivating landscape photographs and images, we take in the beauty without taking in the trees. It is beyond this point that most of us change directions and go off towards modern, fast-process systems, which we then proceed ...

Thorsten Sellin was an outstanding criminologist famous for his opposition to the death penalty (Jonson, Myer & Adler, 2011). In particular, he stated that the comparison of statistics from those areas where death penalty was implemented and where it wasn’t practiced showed that it wasn’t in fact effective and didn’t deter people from crime commitment (Hayward, 2010).
Another important role that Sellin played in the history of criminology was introduction of the cultural conflict concept, which meant conflict arising between immigrants from one country to another and migrants between different parts of the same country. In ...

Injuries in Sports

Background
In basket ball, the ankle and the knee stand out as some of the most commonly injured body parts perhaps due to the fact that the sport involves a lot of running and jumping which renders the sport one of the most dangerous. While running or jumping, the knee and the ankle are served with the responsibility of supporting a characteristic enormous amount of load. In this light, it is valid to say that the success of any athlete involved in basketball as a sport is overly dependent on his ability to avoid overloading the knee and the ankle, Common ...

Malaria is a tropical disease that has claimed many lives over the numerous centuries gone by (reference). It usually caused by the genus Plasmodium. The vector for this parasite is a female Anopheles mosquito which transmits the pathogen through bite (reference). One of the major challenges in disease vectors is insecticide resistance. Vector-borne diseases are usually a burden in developing countries because it is not easy to reduce/control disease. In many parts of Africa, Anopheles gambiae has developed resistance towards pyrethroid insecticides which is used to control the malaria vector (Kumar, Dudley, 2007). It is feared that there are high chances of ...

Introduction

One of the characteristic features of construction industry is late adoption of information and communication technologies. Nowadays, software for preparing 2D drawings and bookkeeping software are perhaps the only widely used in the industry. Other advanced but extremely useful tools like 3D, 4D modeling, web-based project management, automation of resources management, planning etc, are used very rarely, and if used then incidentally. In this report there will be covered problems and perspectives of using ICT in construction industry, discovered the techniques of using ICT in different spheres of construction, and shown the ways of implementation of ICT techniques in ...