Instructional model employed by educationist is instrumental in defining the ability of the learner to grasp a given concepts. In curriculum development, educationists often consider psychological factors and how they affect learning. Today, no one can deny that instructional design has changed incorporating the use of technology. A bid to understand the concept of instructional design technology would expose the learner to various definitions of the concept. In each of these definitions, critics tend to tend to marry the use of technology e.g. computer, projectors, and radio to aid the teachers instructions. The instructional design technology encompasses a complex process of ...
Design Reports Samples For Students
725 samples of this type
Regardless of how high you rate your writing skills, it's always an appropriate idea to check out an expertly written Report example, especially when you're dealing with a sophisticated Design topic. This is exactly the case when WowEssays.com database of sample Reports on Design will prove useful. Whether you need to think up a fresh and meaningful Design Report topic or look into the paper's structure or formatting peculiarities, our samples will provide you with the necessary data.
Another activity area of our write my paper website is providing practical writing assistance to students working on Design Reports. Research help, editing, proofreading, formatting, plagiarism check, or even crafting entirely unique model Design papers upon your request – we can do that all! Place an order and buy a research paper now.
Mathematics 101
The Golden Ratio and Its Use
The Golden Ratio (also known as the Golden Mean, the Golden Section, and the Divine Proportion) is the proportion of two quantities, such that their ratio is equal to the ratio of their sum to the biggest of those quantities. Due to its curious properties, throughout the history this ratio has been of interest not only to the mathematicians, but also to people of art – such as painters, architects, and designers.
The studies of this ratio began in ancient Greece, being related to the geometric problem of cutting a line section into ...
Ergonomics plays an important role towards the contribution of better efficiency at the workplace and even in everyday life. May products are ergonomically safe and contribute towards better efficiency; however, some products may cause hindrance towards attaining efficiency because of their poor design. Most of the times, people are unable to identify the cause of decreased efficiency; therefore, ergonomics is a science that is employed commonly at the workplace. A very basic example of an ergonomic product would be a desk chair. It is important to recognize that one chair may not be the ideal chair for every person. Each person ...
LASER is an acronym for Light Amplification by Stimulated Emission of Radiation. Laser is a powerful source of light with properties that are not found in normal light sources. Laser sensors offer long ranges of detections and high resolutions. They are good at accuracy, speed and reliability. They work at temperatures irrespective of variations. Lasers occur in various mediums such as solid, liquid, gas and semiconductor.
Laser is an electronic diode that converts an energy source into a thin and concentrated beam of light, which is used to detect very small objects or to reach very high distances. The laser ...
Abstract
The objective of this experiment is examination of diffraction and interference of visible light when it is passed across narrow double and single slits. In order to do so, the diffraction patterns of light will be investigated through collection of pertinent data relating to the distance between pattern’s centres and maxima. Of particular interest in this experiment is the varying intensity of light and respective positions on the display screen as ascertained trough measurement and calculation of width and separation distances for respective patterns. The experiment concludes by highlighting the wave attributes of visible light as manifested in ...
Project Title: Selection Materials
Module Code:
Project Due Date:
DCU Statement
Plagiarism means presenting another person’s words, ideas, designs as your own word. Plagiarism comes in a different form, like copying text, diagram, formulae, etc. Plagiarism is a serious offence. Plagiarism is referred to the disciplinary committee of the university. Committee will take the serious action on the plagiarized materials.
Aim and Objective
This project is being aimed to model the stress the board by considering a typical beam supported by the equal pressure on the bottom and it must withstand a point force.
1. Introduction
The material selection is the process of designing a ...
My job as a menswear designer has been very enterprising. The job has enabled me to interact with people of diverse origins and has also enabled me to find satisfaction. I make good use of my strength as a creative designer to the satisfaction of my clients. I also make amends to my weaknesses. The best thing a worker can get from the job that they do is satisfaction and the pleasure of their clients. Having been a designer for some time now, I believe that I have enough experience that I can share with other people so that they, too, may find ...
Introduction
The building to be assessed in this paper is the Menards hardware store located at 3210 North Clairemont Avenue, Eau Claire, Wisconsin. The store belongs to the Menards hardware chain stores. It stocks essential hardware supplies such as nails, gardening tools, light fixtures, furniture as well as groceries. The primary users of this building are shoppers and employees.
Risk Analysis
The likely perpetrators of violence at this site are domestic and international terrorists and individuals. The terrorists are likely to use explosives while individuals are likely to use guns such as shot guns or automatic rifles. The target victims are likely ...
1151 W MacArthur Ave, Eau Claire, WI 54701
Report on Module 2: Building Security
I. Introduction
The site that I assessed is Super 8 Motel located in 1151 W MacArthur Avenue, Eau Claire, WI 54701. The place is along a highway and in nearby strategic locations, such as the University of Wisconsin. The privately-owned building is for individuals, families, etc. (especially, travelers) who pay for lodging and related services (e.g., free breakfast). The primary users of the site are the public (for example, tourists, travelers, and other individuals).
II. Risk Analysis
The most likely perpetrators of violence at this site could be any ...
Introduction
This report indicates the design of a database for the Care for Kids crèche database. This is a database which will be utilized to store information in regards to the booking of the forethought focus. The staff will figure out how to store information in regards to the booking that will be made by the folks to the consideration focus. It is critical to comprehend the prerequisites of the database and how information will be connected. The paper will evaluate the intelligent design and how the design will help make a database that will be utilized within the kid care center.
Design
...
MEMORANDUM
This memorandum gives a description the extended description of how solar heat is generated for cooking. This description will include sections as follows: purpose of the concept, principles of heat, materials requirements, design principles, operation of solar cooking device, and future development. With this information, the basic description of the concept of solar cooking shall have been described.
Purpose of the concept
Solar cooking is a technology that is utilized in using the solar energy to generate heat for cooking. This is a technology that has been seen to help many users utilize solar energy for cooking. With this technology, energy from the solar system has ...
Haniwa Horse
Description of the historical work in Ceramic Media
Haniwa Horse encompasses a small horse hollow terracotta statue placed in aristocratic graves during the Kofun period in ancient Japan (Haniwa uma 43). Haniwa is Japanese word that means circle of clay to refer to the unglazed red clay cylinders put around the burial mounds. Haniwa horse supports the ground on the imperial burial mound to provide stability and support the roof of the tomb.
The artisans of the Kofun era were the first to design the Haniwa Horse during Japan’s Iron Age. The Kofun means an old tomb ...
Introduction
The purpose of this experiment was to observe the diffraction patterns formed by laser light passing through a single slit and verify the position of minima and determine the position matches with the theoretically predicted position. This was ascertained by comparing the value calculated slit width with selected slit width of 0.04mm. It was hypothesized that there would be variations in calculated value and selected value.
Materials
- Track and screen from Basic Optic System (OS-8515)
- Diode laser (OS-8525)
- Single Slit Disk (OS-8523)
- White paper
- Metric rule
Procedure
The laser was placed at one ...
This topic is derived from module 1 in the definition of instructional technology where Cass Gentry (Gentry, C. (1995). Educational Technology: A Question of Meaning. In G. J. Anglin [Ed.], Instructional Technology: Past, Present, and Future, [Chapter 1]. Englewood, CO: Libraries Unlimited, pp. 1-10.), defines instructional technology as: "The systemic and systematic application of strategies and techniques derived from behavior and physical sciences concepts and other knowledge to the solution of instructional problems."
It is the last part of the definition “solution of the instructional problem” that the topic seeks to unravel, i.e. how do the instructional technologies ...
The aim of the project was to build podcasting system for the sake of emergency alerts capable of being transmitted through the network and compatible with any network device. Its scope was considerably greater as it aimed to provide an alert system which is more efficient and powerful than the present already implemented a system. The system should also cover all those shortcomings that existing alert system inherently possesses. The scope was achieved as the planned objective has been obtained, and an alert system was successfully designed as a thought in the planning stage.
Cost: The cost was actually supposed ...
Introduction
This report will focus on failure damage on the road. It will take the given specifications from the director, and examine three different types of failure damage on a 300 meter stretch of pavement. The purpose of this project is to understand the road layers and the problems that may effect on each layer with different causes in each damaged selected location. This project also highlights the important role of creating study case and the advantage of making early fixing or maintenance to avoid the future unexpected damage on road. Moreover, this project’s emphasis how weather condition has the ...
- Introduction
The subject of this study concerns some of the most serious pavement deficiencies: alligator cracking, bleeding, and potholes. Alligator cracking and potholes can often shorten the pavement’s lifespan. Bleeding more often impacts road safety; bleeding causes reduced friction which, in turn, can cause skidding for drivers. The case study focuses on alligator cracking, potholes, and bleeding in an effort to explain their impact on pavement, as well as how they are remedied. In an effort to better understand the detriment these issues cause, a local two-lane road was studied for evidence of distress and damage.
...
Abstract
Flexible pavement distresses are caused by poor design, wear and tear, and traffic loading beyond design capacity. The amount of loading that a pavement can bear without failure is determined by the strength of the subgrade and the surface layer. Pavement failures are of eight major types; potholes, bleeding, alligator cracking, rutting, shoving, depression, block cracking, and longitudinal cracking. Each pavement distress has causal gents and repair methods defined by local and international codes. This report shall focus on bleeding, potholes, and alligator failure.
Introduction
Potholes, bleeding, and alligator cracking which are the subject of this case study are some of ...
INTRODUCTION
Baghouse filters are fabric filter units consisting of one or more isolated sections containing an array of fabric bags (Vatavuk, 1998). Shapes of these bags range from round, flat, tube-shaped, to pleated cartridges. In theory, gas containing high particulate matter level passes through the fabric bag surface. The particulate matter is retained while the cleaned gas is either recycled to the process or vented off the exhaust. This paper attempts to discuss the different concepts behind baghouse filters in relation to environmental engineering. Specifically, this paper discusses (a) particle pollution, (b) baghouse filter principle, (c) filter media selection, (d) types of ...
A PID system refers to a control system with a proportional, differentiator, integrator gain respectively. The PID measures the process variables and compares them with the set point. The controller then attempts to reduce the error accordingly, based on the predesigned algorithm. Proportional, integrator, and differentiator are independent parameters. However, they are designed to work separately or together to improve the stability of the system. These parameters reduce improve the stability by reducing the overshoot and the error within the system. This project intends to explore major applications of a PID controller and the approach that is used to improve the stability ...
Abstract
Concrete acts as one of the most essential and cost-effective construction material made from a mixture of sand, cement, aggregates, and water. Cement acts as a binder for holding all the components together. Engineers working in the construction site must understand the purpose of the construction because different structures require different concrete strengths. The strength of cement paste used controls the overall strength of concrete that depends on the water-cement ratio. The following experiment was conducted to investigate different mechanical and physical properties of concrete.
Objective: To determine mechanical properties of concrete.
Materials used: Aggregate (coarse and fine), sand, cement, water, compressive machine, cylindrical and rectangular molds, timer, ...
1.0 Introduction
Only 2% of the water on earth is fresh water (Symons, 2001). The rest is primarily saline and hence cannot be used for consumption, or other applications in the home (e.g., cleaning or washing). Most households rely on piped water from municipalities (Kahramaa), whereas others are sourced from independent water purifications plants, private wells or even from rain water. With a growing global population there are increasing pressures on the world’s fresh water supply. As such, water conservation has become critically important, particularly in regions where the water table is low, and other fresh water sources ...
(Instructor Name)
Introduction
Rapid changes in the way we communicate across the world have brought about significant changes in the last two decades. As an individual or as a professional, one can see and experience the effect of this globalization in our lives everywhere. Food, culture, art and fashion provide outlets for the reflection of a variety of cultures in a single setting. As a fashion designer, one has to be conscious of these influences that emanate from all parts of the world. As the world grows closer together, cultural influences from one or more parts of the world are likely to make an ...
Introduction
According to the Project Management Institute, the term project management refers to the precise application of skills, knowledge and techniques to implement projects in a commendable and efficient manner. It involves the strategic proficiency for organizations, through individuals to enable them tie project outcome to the business goals and objectives to boost their market competition. It is often with integration of planning, motivation, organization, and control of resources with clear protocols and procedures to accomplish specific objectives in pragmatic (scientific) manner. It is in the light of the above that the Crossrail railway project, which is a 118 kilometer east - ...
Introduction 3
Background on Report 3
Current Technologies
Photovoltaic (PV) Solar Technology 5
Concentrated Solar Power (CSP) 8
Solar Heating and Cooling (SCH) Technology 10
Analysis and Recommendation 11
Conclusion 12
Figures and Tables
Figure 1: Diagram of a P-N junction in a Photovoltaic Cell 6
Figure 2: A Typical Parabolic Through CSP System 9
Figure 3: Wakiki Shore Apartments in Honolulu, Hawaii 11
Used in Contemporary Society
Introduction
The use of fossil fuels results in combustion gases which contribute to global warming. Furthermore, these combustion gases result in air pollution which is detrimental to the ...
<PUT THE MODULE CODE AND NAME HERE>
<PUT YOUR NAME HERE>
<Put your student number here>
<Put the name of your institution name>
<Put the submission date here>
Executive Summary
WebNext is a proposed graphic design services being started by two trained and educated entrepreneurs with a total investment of GBP 42,556. It is projected that during the first year of operations itself the business will earn a revenue of about GBP 100,000 and will make substantial profits that will only continue to increase over the three year period projected in this document.
...
Theory
In our experiment, we study the interference of light using coherent, monochromatic light and two slits. The two slits, separated by a distance d, act as two light sources and their light waves interfere. The light passing through them is captured on another slide kept at a distance D. Here we see the interference pattern consisting of alternating bright and dark light. This effect is seen as the light waves from the two sources meet in phase (increased amplitude) and out of phase (decreased amplitude) creating the bright and dark spots. If hm is the distance of the mth bright band ...
The ISO 9000 Quality System Standard is described as standards and quality assurance measures and thresholds that have been set to be used as benchmark worldwide. The benchmark is utilized to aid in the determination of quality management and assurance. This essay seeks to discuss and summarize some of the basics of ISO 9004 2000 pp v – 45. At the end of the essay, the reader should be able to have an overview of what is contained in the ISO document. The document at hand represents a revised edition of the previous ISO 9004-1:1994. It has been modified so as ...
The global market of the luxury handbags is a sector that has seen an upward trend on a consistent basis. The primary reason for the luxury hand bags ever increasing consumer base is the fact that the demand for the luxury handbags has been immense from the emerging markets and predominantly cater to a woman consumer base.
The increase in the disposable income is one of the primary reasons for the growth of the luxury handbag market, with an ever expanding middle class focused on style and status and to dominate peers in terms of lifestyle and a preference for branded products, ...
Hotel Design
Literature Review on Latest Furniture, Fixtures, and Equipment for a Luxury Hotel
Introduction
The term luxury has been greatly misused. Many institutions use it without knowledge of what it should entail. Institutions like Forbes set standards for luxurious hotels. However, they have not been able to come up with a proper description of luxury hotels (Yee 2005). Luxury hotels have the following characteristics. First, methods of booking and travel agents are easy and well planned. Their services are quick and efficient. Secondly, the rooms are able to accommodate all people: handicapped and pet-friendly. They have plunge rooms, king beds ...
Lab #9: Dimensional Analysis and Similitude
Introduction
Dimensional analysis is one of the powerful tools in the determination of relationships between physical parameters. This technique involves manipulation and comparison of the units of physical features so as to achieve the desired relationship, whose units conform to the expectation of a quantity being derived. On the other hand, similitude refers to the a technique where a real life structure or component is reproduced by at a lower scale such that every dimension is drawn to the scale and at a constant proportion among all members of a structure. This technique assumes that a model behaves in a similar manner as a prototype and the ...
Russian Constructivism was founded by VladmirTatlin as a new interdisciplinary movement. Its name was coined from Tatlin’s construction of abstract sculptures (Fleming, 2009). The movement entailed the Russian Avant-garde and was in action from 1913 to the 1940’s. It came in as an artistic and architectural philosophy, a diversion from the idea of autonomous art. It favored art as a practice for social purposes and had a great impact on modern art movements of the 20th century, where great movements such as Bauhaus and De Stijl have borrowed a great deal from it (Cracarft, 2003). Its effect was omnipresent with great impacts ...
Discussion 1
You discussion is very comprehensive and you have answered every question required. You have fully expounded on most of the statements that you have made, for example the part on the pros and cons of the understanding by design method. I have one major question about your essay. How the stated cons that you have stated be mitigated, that is, how can you reduce the time taken you develop a lesson plan using this design?
Discussion 2
I like that you commenced your essay by giving a definition of the “understanding by design” method. This has enabled the rest of the content to ...
- Abstract
- Construction is an essential factor in the progress of the human civilization. It is in the construction industry that our infrastructure depends upon. The construction life cycle has several phases in it, one of these phases is the design phase. Before the advancement in computing technology - the invention of modern computers - construction engineers do manual designs; that is, through pencil and paper. This method of designing has become unfit as larger more complicated infrastructures and engineering designs develop. Hence, the need for a tool that will help construction engineers in the design phase. On ...
Final Report
Our goal is to design a system that would be used to measure the temperature by changing resistances. The system would work in a solid medium but we would also try to make it functional in liquid mediums such as oil, fuels and such other liquids. This instrument should be able to measure the temperature of the liquids from -259.15 °C to 400 °C and we should have a resolution of ±0.018 V.
Instrument Details
The RTD is made of platinum coated nickel and should be attachable to the oil tank. i.e, it should be resistant to vibration, high pressure, oil and heat (e.g. ...
Economic Report about Current Commercial Gasifiers
GE Energy Gasifier
GE Energy Gasifier uses the entrained flow, coal-water slurry feed, refractory lined slag and oxygen blown technology. The manufacturers at GE Energy have two variants, one with a radiant cooler and another full quench gasifier. Their products use a wide variety of fuels like low rank coals, pet coke, bituminous coal and other blends of pet coke. The design of GE Energy Gasifier emphasizes on operational eficiency. This is achieved through optimization of heat recovery and production of carbon monoxide. As espoused earlier, the GE Energy Gasifier predominantly uses the direct quench system. This design is not ...
Physical Design Considerations
In the setup of information given in the system, it is clear that the numbers of different relations mostly the one-to-many relationships are eight in number while some of them like the case of 2 are taken as the reference entities in this case and these are the cases of PB_vet and the PB_visit. This concept clearly shows that one-to-many relationship can be implemented in this database design to come up with an appropriate solution to solve the company’s problem.
The different types of processes involved in the database development with respect to the company is like ...
1.0 Introduction
What is a Lean Technique? It is an inexorable pursuit of maximizing value for the customer by eliminating waste in the process of delivering a standard product. It is structured into two categories; lean enterprise and lean system. Lean enterprise emphasizes on organization culture where staffs are in a constant improvement of their skills and production levels. On the other hand, lean system concentrates on waste (Mura) prevention such as labour, materials used and extra time that is not valuable to the main production service (Oehmen et al., 2012). Project management is defined as an application of skills, knowledge ...
Abstract
Rapid prototyping describes techniques that designers employ in order to fabricate models of a physical product using computer aided design in three dimensions. . Rapid prototyping allows the designer to bind one layer of material to another layer using computer aided design on three dimensional frame. This report describes rapid prototyping techniques as applied in a case study. The report will pay attention to the prototyping technology used, the materials used in producing a prototype and the accuracy of the models that are produced using the rapid prototyping technology in question. One of the most prominent of these techniques is stereolithography. Since the ...
Introduction
When objects are accelerated, inertia-forces are generated. This is the case with rotating machine elements. The design of such parts must ensure that they perform their intended work under all the existing combinations of service loads and rotational forces or inertia forces. The rotation of a machine element results in an external vibrating force. The shaking force disturbs the supporting frame of the machine and the adjacent parts. It is also worth to note that the vibration generated by rotating machine elements and consequently the associated noise is also a serious problem to the machine operators. Therefore, it is very important ...
Abstract
Presented in this report are the results and the discussion of results for static and dynamic balancing. Static and dynamic balancing of rotating element in a machine is very important. The report has shown that the disks may be statically balanced but dynamically unbalanced. In the second part of this experiment, the arrangement required to balance the rotating shaft dynamically was obtained. The observations and results obtained in this experiment were consistent with our expectations. The second part of the experiment-involved determination of parameters needed to balance shaft and dynamically. The parameters determined in this case in order to balance ...
Introduction
Cylindrical pressure vessels are often used for a variety of functions. Some of these functions include the storage of liquefied petroleum gas, either during transit or in the countryside where cooking gas is not piped into their houses. Cylindrical pressure vessels are also used in the storage of fuel in gas stations in underground bankers, from where the fuel is pumped into the vehicles at the filling point. Due to these varied functions, it is important to understand the dynamics of stress and pressure on these cylindrical tanks. This is very important, especially in ensuring the structural integrity of these ...
EWB Challenge 2014Plan Timor Leste
Sustainable Engineering Practice
South Australian Institute of Business and Technology
Executive Summary
This report provides details on the project that aims at facilitating for the creation of an anaerobic/biogas digester in in Codo town. This is a small town that is situated at Lautern District in East Timor, and it has a population of approximately 500 people. This town lacks a system that can allow them to dispose and manage their waste in an effective manner. They bury their waste underground, and they use burning wood to serve as a means of cooking. The report will suggest various ways that ...
Concrete is the most economical building material that can withstand high compressive strength, but cannot exhibit sufficient tensile forces. On the other hand, steel is considered a good building material in the context of tensile strength. It can withstand tensile strength much more than concrete. A properly designed concrete building structure hold increased strength and ductility even in areas prone to seismic conditions. The performance of buildings during an earthquake depends mainly on design instead of the material used in the process of construction. In conducting comparison between concrete and steel buildings, on can find benefits in both types of ...
Introduction
The Pacific Spirit Regional Park is one of the oldest parks in the city of Vancouver. Situated on the surrounding lands which are owned by the University of British Columbia, it is a preferred spot by the residents of this area because of the lush green enclosures and numerous trees. It is also close to Point Grey which has been in the news lately because of the studies being conducted to bring its cliff erosion problem under check. This park has been declared as a natural preserve by the Government of the state and thus has been given an Electoral Area ...
Engineering
2014-03-31
Introduction
Design engineers should consider several factors in three-design stage. Respectively, every configuration has its characteristics with in regards to reliability, the initial cost, maintenance cost, as well as simplicity among other evaluative tags. Design engineers have to analyze the situation with respect to these aspects of performance before deciding on the bus configuration to adopt. Nevertheless, defining the consistency of a substation may likewise be the essential for current system connections as it may better aid in pinpointing the very weak points that may be help to overall system irregularity.
There is a mere logic in ...
Introduction to Pacific Spirit Regional Park
Pacific Spirit Regional Park is located on the University Endowment Lands. This city is located on Point Grey, to the west of the city of Vancouver in British Columbia. The Pacific Spirit Regional Park surrounds the endowment lands of the University of British Columbia. The park is a natural preserve of the British Columbia Government and has been classified under Electoral Area A. The park itself contains over 73 km of area which has been designated for walking or hiking with well laid out trails. 50 km of this area is also available for multiple purposes like cycling and horseback ...
Abstract
Paul Rand was an American graphic designer whose works were characterized by the use of humor, symbolism in visual image and the rebus-like pun. A self-taught designer who learned about graphic designs reading journals and books, he was famous for the creation of corporate logos and posters like that of IBM, ABC Corporation, Enron and Atlas among others. His two masterpiece creations, which are still in use today, are IBM logo and IBM poster. This paper has given an in-depth analysis of the two along with a glimpse into the life and career of Paul Rand and his contribution to ...
Prototype Description
The glider prototype has a standard tail and is going to include regular wings made of paper that will act as a representative of an actual glider. Two pieces of wood of the same length are joined to meet at a ninety degree angle. Another two pieces of woods are added to support the glide structure.
Construction
The Balsa glider prototype is constructed using four pieces of wood. Two pieces wood of the same length (each 30cm in length) are attached together at an angle ninety degrees. The two remaining pieces are placed variably to cross each other and meet at the ninety ...
Aims and Objective
The highways part aims to provide the student the basic understanding of highways design construction. An understanding of highway design construction needs an understanding of the practices associated with the rote selection is the traffic flows, vehicular behavior, and highway capacity, and also other environment. It is also aims the student to provide the basic understanding of the pavement and the traffic signals.
Learning Outcomes
This case study is to aims to give the student an experience of completing the exercise. The highway route selection, carriage stand, and the pavement design. This allow the student to become proficient in skills to ...
ENGINEERING
Abstract
Wind turbines have become a practical and efficient fossil fuels replacement for the generation of electrical energy. Characteristics optimized include weight, ease of manufacture and structural integrity. Ease of manufacturing has a direct relationship to costs. Lighter materials for blade construction are necessary to decrease blade weight and lengthen blades. Carbon fibers or composites of glass and carbon fibers are lighter than glass fibers. Hypothesis: controlling the speed of the infusion will allow the capacity to manage the speed of the infusion process and in that way control of the final composite material. Results showed that 68.5 meters has ...
Introduction
This report shows the design of a database for the Care for Kids crèche database. This is a database which will be used to store information regarding the booking of the care center. The staff will manage to store information regarding the booking that will be made by the parents to the care center. It is important to understand the requirements of the database and how data will be related. The paper will assess the logical design and how the design will help create a database that will be used in the care center.
Design
There will be various tables that will ...
[Author]
1. Introduction
The engineers are also called as the creator of the new technology, certainly engineers focuses to create a product based on the user needs. The engineers try to satisfy the user. There are some engineering excellent creations like ATM machine, Vehicle, Mobile phones etc, which are still used by more users. The first duty of the engineers while designing a product is considering safety to the public while using their product. The knowledgeable engineer always consider the safeness of the product while he or she is designing the equipment, but there are some engineering failure in ...
Final project plan
EXECUTIVE SUMMARY
Information technology is an important aspect of business processes. There is a need to have information technologies put in place to ensure that the business processes that are included in the company. For these information systems to be integrated in the company there is a need to have the infrastructure of the company and the processes aligned and prepared for effective service delivery. There is a need to have infrastructure in place to make sure that the capacity of the new systems is supported. The information systems are required to ensure that the data flow and flow in the ...
Relationship between infrastructure and security
The way the network has been planned has significant impact on the way the security of the company will be undertaken. It is important to understand the gateways and the security devices have been planned. It is also important to understand the policies that have been put in place to have the data of the company protected. There is a need to analyze the flow of information so that the diagnosis of any security faults will be easy to identify. Security depends so much on the infrastructure that has been put in place in the company. There is a need to ...
“I hereby certify that the contents contained within are my original work and have in no way been influenced by outside works other than my own personal research.”
Petra in Jordan – a city of dreams
Abstract
Petra is a historical and archaeologicalcity which is located in the Ma’an region of Jordan. It is famous for its original and unique rock cut architecture and its water conduit system. Petra is also known as the Rose City due to the beautiful and original colour of its stone which is carved and hewn out of the rock.
This paper examines the historical aspect of the city in ...
The Clifton Suspension Bridge stands out as one of the historic bridges which span the Avon George and the River Avon joining Clifton in Bristol to Leighwoods in North Somerset. The bridge opened in the year 1864 and was designed by the engineering quintessential Isambard Kingdom Brunel. This paper seeks to analyze the engineering and construction challenges that faced the designers of this most historic suspension bridge.
The construction of this bridge took almost a total of three decades that is, from the first laying of the foundations stone in the year 1836 to the year 1864 when it was ...
Introduction
Front end, in computer science, is responsible for collecting inputs from various users and processing the data to conform to the requirements of the end user. The front user database is a platform between the user and the back end user. In computer software architecture and design there are many layers between the hardware and the end user. Each interface between the hardware and the end user can be spoken as having its own front user interface. The front user interface is, therefore, an abstraction, which simplifies the core components by providing a user-friendly interface. In the design of the websites, ...
The readability of a website is determined by the goodness of its appearance and design; therefore, fonts play a very significant part in Web design. It really matters what type of font one uses in their website. According to Rahul (2013),Google fonts provide people a great collection of open source licensed real-type fonts. It enables people access a free way to use web safe and stylish fonts on their websites without paying money for its usage license. Google Fonts enables one to use more fonts in their website without even uploading the font to their server.
How Google Fonts Work
Two important things a person must consider ...
Company description
Inpix is a private management-owned company whose business jurisdiction encompasses web design, Photoshop, programming and a whole range of multimedia services. Founded in the year 2000, the company has recorded a continuous growth in services deliverance, market size and employee base. This is attributed to the hardworking team of management that over the years has come up with approaches that combines the most powerful aspects of technology, design and marketing strategies that has put it a notch high in the market.
The company growth is fuelled by the long-term partnerships that it has developed with its clients. This relationship is built on ...