Diagram Reports Samples For Students

REPORT NUMBER 2

The report presented is the sole work of the author.  None of this report is plagiarized (in whole or part) from a fellow student's work, or from any un-referenced outside source.

AIM:

The purpose of this experiment is to:
Investigate the voltage switch over the points required for logic high or low levels.
Prove experimentally different Boolean laws and logic theorems.
Use different logic laws and theorems, to simply a combinatorial logic circuit.
INTRODUCTION:
This level detector circuit is based upon a LM311 Digital Comparator. This digital comparator is a device that produces an output level, either high or low ...

Executive summary

The world of technology has given rise to the most sophisticated gadgets in communication that has made life easier. The ipad is one of the many products that are manufactured by Apple Inc. Ipads are one of the fastest selling communication tools in the Australian market due to its various advantages (Trenholm, 2011, p. 67). Apart from being portable due to its small size, the gadget is also sophisticated; this is a quality that most people are looking for in the market. It is said that by 2016, about half of the people in Australia will have access to the ...

(QAM) Laboratory Report

For (XXX)

Objective:
Components required:
A carrier source, data source, phase shifter, multiplier, symbol mapping, noise channel, PCB board, phase scope and oscilloscope.
Theory:
There are two types of modulation technique namely analog and digital. QAM is a technique that uses both analog and digital modulation technique. It is the abbreviation used for Quadrature amplitude modulation.
In analog modulation scheme it passes the two message signals by varying the amplitude of the two carrier waves using amplitude modulation method. In the case of digital modulation technique two digital bit streams are transferred in which ...

Introduction of Systems Analysis & Design

Systems analysis refers to the process of disintegrating a system into various components and determining how these components can interact and function. On the other hand, system design refers to the process of configuring necessary software and hardware components which can be used to solve a problem . System analysis and design is employed in different entities including manufacturing, business, and processing entities . In a business entity, system analysis is used to planning viable projects, defining requirements, and setting priorities for changing or improving existing systems. A business environment is dynamic in nature and full of uncertainties. Therefore, firms have to strategically plan ...

Comparison of Maestro with Adaco ERP Vendor

The hospitality industry has competitively experienced a huge competitive edge across the globe day by day. Within the framework of Enterprise Resource Planning (ERP), the hospitality industry has several ERP vendors which provide different forms of software to provide a smooth operations of the industry’s activities.
First, Maestro ensures provision of a full spectrum of hospitality services and software in infrastructure management, which includes vendor management, help desk support, upgrades, virtualization and integrations/migrations. On the other hand, Adaco provides a globally leading operation and purchasing control solution for the hospitality industry.
The products offered by Adaco.NET encompass a ...

REPORT NUMBER 6

‘State Machines and Code Generators’
The report presented is the sole work of the author. None of this report is plagiarised (in whole or part) from a fellow student's work, or from any un-referenced outside source.

PRACTICAL 6: STATE MACHINES AND CODE GENERATORS

AIM:
INTRODUCTION:
This laboratory is about the design, implementation, and testing of a state machine counter and a pulse train generator. The circuits will use JK flip-flops and logic gates to implement the necessary logic operation of the problem. The ICs used are the 7474 JK flip-flops and the 7400 NAND gates . The state machine counter has to follow a State Transition Diagram ...

REPORT NUMBER 4

‘LOGIC DECODING CIRCUITS AND MULTIPLEXERS’
The report presented is the sole work of the author. None of this report is plagiarised (in whole or part) from a fellow student's work, or from any un-referenced outside source.

AIM:

INTRODUCTION:
This experiment is about the design, implementation, and testing of logic decoding circuits. In PART A, an industrial system problem is presented which requires a logic decoding control system. The solution to the problem is a combinatorial logic circuit that takes four (4) logic inputs (Bottle Position B, Water level indicator W, Flow valve position V, and Water filtration system F), and ...

Abstract

Presented in this report are the results and the discussion of results for static and dynamic balancing. Static and dynamic balancing of rotating element in a machine is very important. The report has shown that the disks may be statically balanced but dynamically unbalanced. In the second part of this experiment, the arrangement required to balance the rotating shaft dynamically was obtained. The observations and results obtained in this experiment were consistent with our expectations. The second part of the experiment-involved determination of parameters needed to balance shaft and dynamically. The parameters determined in this case in order to balance ...

Lab Report (Kirchhoff’s Laws)

Introduction
This lab experiment was intended to learn and apply Kirchhoff’s Rules in calculating the current and voltages in a circuit. To achieve this, a circuit is built consisting of resistors that are in parallel and series which will aid to test the different aspects of Kirchhoff’s Rule.

The simplest circuit is that which can be reduced to an equivalent circuit having a single resistance

and a single voltage source. Many circuits are not simple and require the use of Kirchhoff’s

Laws to determine voltage, current, or resistance.

Objectives:
forecast by Kirchhoff’s Laws.

Theory:

A junction is a point in a circuit where more than three wires join or where a current gets divided.
A loop is a path which is closed by two ...

Experiment 5: Vectors and Static Equilibrium of Forces

INTRODUCTION:
In physics, the subject of statics deals with the description of conditions of force system that is necessary to maintain the state of equilibrium of engineering structure. When a body is in equilibrium, the resultant of all forces acting on it is zero. Main condition for static equilibrium is that the vector sum of all the forces acting on a body must be zero. In this report equilibrium was discussed by carrying out an experiment. For an analysis of a vector quantity like force vector operations like vector addition and subtraction are required and in this experiment this vector operation ...

Introduction

When objects are accelerated, inertia-forces are generated. This is the case with rotating machine elements. The design of such parts must ensure that they perform their intended work under all the existing combinations of service loads and rotational forces or inertia forces. The rotation of a machine element results in an external vibrating force. The shaking force disturbs the supporting frame of the machine and the adjacent parts. It is also worth to note that the vibration generated by rotating machine elements and consequently the associated noise is also a serious problem to the machine operators. Therefore, it is very important ...

Introduction

As the business world, including the Information Technology industry, becomes more and more complicated and dependent on technology, the need to organize systems and methodologies turns out to be a necessary requirement in order to develop well-functioning information systems that ensures the users' needs are understood and met with the correct business solutions at hand. Thus, this paper aims to introduce the various concepts involved in systems analysis and design (SAD) such as business information systems (BIS), rich pictures (RP), soft system methodology (SSM), system development life cycle (SDLC), and flow diagrams. In addition, this introductory paper will show how ...

Star schema (simple)

“Star” schema is actually the simplest architecture within data warehousing. This architecture is termed as star because of the diagram that looks like a star. In the center of this diagram, there is a “fact” table that links to the “dimension” tables. Star schema is the most common data warehousing schema that is used. Oracle recommends it to be used. Star schema is a widely supported business intelligence tool. This architecture is very useful since you can create some useful queries and in addition it is very easy to do since not many tables need to be joined (Wang 2006). Another advantage ...

Introduction

Signals that are periodic can be represented in time and frequency. In any analysis there are major signals which are used; these signals include sine, triangle and square. Additional signals can be derived from the three main signals. There is an important component in signal technology, the low pass filter. This is an electronic gadget that used in the filtering process of the signals. The filtering process is undertaken by allowing all the frequency components that come below the cut-off frequency to go through the circuit while all other frequencies that are above cut-off frequency will be bypassed. Noise ...

SYSTEMS ANALYSIS & DESIGN

Introduction
Watches4U Company is owned by Danny and Janice Robinson. They deal majorly with the sale of watches. The business has been expanding in the recent past and the owners are devising mechanisms of improving the quality of services being offered by the company. The management is contemplating to integrate a sales management system that will help them in managing their daily business activities at the firm. Some of the system requirements include:
i. Server – the system should be in a position to manage its own server that will be used for coordinating all the activities in the firm.
...

Introduction

Group D has been tasked to deliver a concept ideation report explaining the reasoning behind the chosen concept that will be constructed to achieve the goal set out in the Warman Design & Build Challenge 2016. This concept ideation report has been completed in order to reduce the likelihood of error in specifications and function, manage costs, mitigate risks, and evaluate the expected success of the final concept. [1]
This report explains the approach and principles utilised by group D to create a comprehensive design. The principles utilized will include: The Development of Product Specifications, Development of Functional Analysis and ...

Introduction

At times, industries require the temperatures to be kept below the ambient for some processes to be effective. To do so, they must design ways to eliminate the excess heat generated by machines and introduce an artificial room temperature lower than the ambient. They must effectively eliminate temperatures above the ambient. A refrigerator is thus required in these operations. This refers to a device that can maintain the temperature below the ambient. The primary objective of a refrigeration process is to lower the temperature through heat removal. Since its invention, refrigeration has seen used in many industrial and household ...

Introduction

This report indicates the design of a database for the Care for Kids crèche database. This is a database which will be utilized to store information in regards to the booking of the forethought focus. The staff will figure out how to store information in regards to the booking that will be made by the folks to the consideration focus. It is critical to comprehend the prerequisites of the database and how information will be connected. The paper will evaluate the intelligent design and how the design will help make a database that will be utilized within the kid care center.

Design

...

Lab Report

Objective: To explore the characteristics of three single-phase transformers in a three-phase configuration.
Figure 1: Lab 1, Diagram.
- Star- Star (Y-Y) Connection
In star- star or Y-Y connection, each phase is 120° out of period with the extra two periods. In the same way, each secondary winding is 120° out of phase with the other two phases. Every primary winding is magnetically connected with secondary winding using the common leg. When talking about primary to secondary phases we will see that there is no phase difference in primary-secondary connections. It simplifies that both, primary and derived ...

Introduction

This report shows the design of a database for the Care for Kids crèche database. This is a database which will be used to store information regarding the booking of the care center. The staff will manage to store information regarding the booking that will be made by the parents to the care center. It is important to understand the requirements of the database and how data will be related. The paper will assess the logical design and how the design will help create a database that will be used in the care center.

Design

There will be various tables that will ...

Module 6

Study of Sequential Sequence Detectors
ELEC201
Digital Electronics
Partner Name:
Introduction
Circuits whose state transitions are controlled by a clock pulse are called synchronous sequential circuits. Other circuits whose state transitions are not controlled by a clock signal are called asynchronous circuits. This lab aims at equipping students with knowledge on synchronous sequential machines.
These are machines designed to solve a problem, which requires the output, to be some specific value after a given sequence of input values has been observed. This problem led to the development of two types of machines in the mid-1950s. These machines ...

Executive Summary

Eldredge, Inc. is a major provider of by-product management services with the specific goal of performing these services in a responsible and environmentally conscious manner. With Eldredge’s multi-disciplined professional staff, field technicians and logistics specialists, Eldredge offers a complete spectrum of environmental services. Eldredge Inc. is headquartered in West Chester, PA and it provides services in the industrial, refinery, commercial, government, and utility markets. Eldredge, Inc. operates four main business units including:
1) Waste Transportation
2) Industrial Field Services
3) By-Product & Waste sourcing
4) Oil Reclamation & Water Treatment
Eldredge’s facility is permitted to handle an array of ...

555timer

Introduction
The 555 integrated circuit (chip) is used in a variety of timer and oscillator applications. A 555 timer is used to provide time delays and oscillations and as a flip-flop element. The device has additional terminals provided to trigger or resetting purpose (Nair, 2006). During the time delay operation mode, time is precisely controlled by an external resistor and capacitor. While working as an oscillator, the duty cycle and the frequency are accurately regulated by two external resistors and a capacitor (Brumbach, & Clade, 2003). 555 is triggered and reset on falling waveforms. A typical 555 timer IC is ...

Final Weekly Report

Introduction
In the efforts of trying to familiarize ourselves with microcontrollers through the Arduino prototyping board, we came up with a simple design project that we executed in a span of five weeks. The design project was about controlling an Arduino board through Bluetooth using the HC-05 Bluetooth module. The project included the Arduino Uno prototyping board, HC-05 Bluetooth module, 16x2 LCD screen and the 4x4 keypad. In this report, a detailed step by step description of what took place in the five weeks has been clearly stated under each week.
In the first week, we did thorough preparations ...

Assignment

Calculate the theoretical discharge for each trial using Eqn. 5.

Replacing all the values
= 5.4 * 6 * 9.81/2 * (2/3)3/2 * 1.53/2
=36.69

Trial 2:

Replacing all the values
= 5.3 * 6 * 9.81/2 * (2/3)3/2 * 1.753/2
= 61.86

Trial 3:

Replacing all the values
= 5.2 * 6 * 9.81/2 * (2/3)3/2 * 23/2
= 90.59

Trial 4:

Replacing all the values
= 5.1 * 6 * 9.81/2 * (2/3)3/2 * 2.253/2
= 126.51

Trial 5:

Replacing all the values
= 5.04 * 6 * 9.81/2 * (2/3)3/2 * 2.53/2
= 171.5

Trial 6:

Replacing all the values
= 4.97 * 6 * 9.81/2 * (2/3)3/2 * 2.753/2
= 225.09

Trial 7:

Replacing all the values
= 4.89 * 6 * 9.81/2 * (2/3)3/2 * 33/2
...

Report

Report:
Abstract:
The report below examines an inverted pendulum experiment. In the report a brief description of the system used has been provided. The aims of the experiment have also been discussed. A block diagram of the equipment used in the experiment has also been included in the report. Matlab has been used to plot the data derived from the experiment and using this graphs the behavior of the inverted pendulum has been discussed.

A QNET rotary inverted kit was used in the experiment. The kit is shown in the figure 1 below. The kit used in the ...

This report presents the static analysis of a beam that is going to be used for lifting equipment in a building. A commercial software package, SolidWorks, is used to perform a set of FEA simulations. Numerical results are compared with theoretical values of maximum stress and deflection for a cantilever beam.
1. Part A
The first part of this report describes a cantilever beam with one end fully constrained and a point force of 5 kN applied at the opposite end. Three cross sections are considered, namely, a wide flange section (I-shape), a T section and a channel cross sections. The beam is made of Mild ...

The share price of a company is important in determining its performance. There are various changes that occur on the share price of a company. These changes can be explained by major events that happen within the course of the financial period (Martin 2012). The movement of share prices is usually monitored in stock exchange markets in order to make comparisons with other companies. This enables financial analysts to predict the future performance of companies. The stock prices may also be an indication of whether the value of a company is high or low.
Flybe Company is an organization that provides ...

Abstract

Water is an important chemical owing to its various uses by living things. Most chemical reactions within the bodied of living things require water in order to occur. It is purported that life evolved from water some 3.8 billion year ago following the organization of inorganic and organic molecule to form as prokaryotic cells. Besides, the well being of a cell is overly dependent of the balance between the water and the dissolved substances in the water. In this regards, the cell can permit water molecules to move in and out of the cell; the process in called Osmosis.

Introduction

In ...

Gantt Chart and Network Diagram

Gantt chart
The picture below shows the Gantt chart of Store relocation project of Hamptons:
There are 14 major tasks to be completed for successful project outcomes, where, four initial major tasks are further divided into sub tasks to lead the project in flow. The first major task of initial research is divided into three sub tasks include problem identification, search for location and feasibility research. The project management decided to allocate two weeks to complete this task. The second major task of planning is directly connected with initial research task; it means that planning cannot be started until ...

The proposal of the network diagram is conceived to a typical organization which has a finite quantity of peer departments (clients), a department server, plotters and a router with firewall capabilities connected to the internet.

Description of the components of network diagram:

Peer departments (clients): Each department may have one or more terminals that receive service information from a department server. Each client may be a desktop or laptop computer connected to the network by local area network (LAN) of by wireless local access network (WLAN). Each client must have an assigned Internet Protocol (IP) that differentiates one client from another. The use of an ...

Introduction

It is important for every mobile robot to possess the ability to navigate in target environment. Navigation can be described here as the robotic system’s ability to identify its own position in an unknown area with respect to some reference point and then move to its target position. In order to navigate in its environment and reach target position correctly, an efficient control system should be designed.
The aim of this project is to design and implement a mobile robot localisation and control.The mobile robot is developed with the ability of:

Localisation System

For a positioning system, it is required ...

The Name of Class

The Name of the School
The City and States where it is located
The petrol industry in the United Kingdom – UK, has seen various changes in the last ten to five years. The market shares and market structure will be examined in more detail for the last five years with representing the main changes in the petrol industry and market shares. The UK petroleum market is composed of various brands. Over the five years similar names have been present in the market. The shares of the petrol companies and retail companies have been changing along with the different composition ...

Introduction

Osmosis is the process by which water molecules move from a region of low concentration of solute to a region of high concentration of solute through a semipermeable membrane (Van 3). Osmosis therefore can define the movement of water in and out of the cytoplasm of a cell. A solution with a higher concentration of solute molecules than that of the cell cytoplasm is said to be hypertonic to the cell. On the other hand, a solution with a lower concentration of solute than that of the cell cytoplasm is said to be hypotonic to the cell.
Purpose: The ...

[Subject/Course]
[Submission Date]

In the first week, we set out to make preparations for our project. Our first step was to search the Internet for resources to help us in the group project. Also, we researched about the useful components that could turn out useful for our idea.
During the second week, we received two Arduino boards and one LCD screen. We ordered two HC-05 Bluetooth shields and more LCD screens. We researched different types of keyboards/keypads that could be used for the project. In addition, we also looked for different ways to connect the Arduinos via Bluetooth and ...

Introduction

The fundamental process of thermal power plants is based on the conversion of thermal energy into mechanical energy and, subsequently, into electric power, using steam as the working fluid. According to the U.S. Energy Information System, over 67% of the electrical energy in the United States is generated through thermoelectric power plants, which use the combustion of fossil fuels such as natural gas, coal and petroleum to generate the steam necessary for the process; moreover, thermoelectric power generation accounts for an approximate 80% of all the power generation worldwide.
Thus, the electricity consumed in most homes and industries is ...

Introduction

Bend (flexure) testing is often done in springs as well in brittle materials whose behaviors of failure are linear like concrete, wood, plastic, glass and ceramics. Bend testing is suitable for evaluating the strength of brittle materials where the results of tensile tests aren’t easy to interpret due to the breaking of specimens around the gripping (Schoffstall, Charles, and Robert 234). In bend testing experiment, smooth rectangular specimens without notches are recommended under three or four point bend arrangements. Figure I below illustrates three point and four point bend arrangements respectively.
Figure 1. Bend testing of a smooth ...

Objective:

This experiment is about the implementation and testing of low-pass, high-pass, and band-pass filters. The frequency response of each filter is analyzed using Bode plots. The properties of passive devices will be used to explain the response.

Equipment List:

EQUIPMENT
Oscilloscope
2 Function Generators

COMPONENTS

1µF Capacitors
1 kΩ Resistors

Relevant Theory/Background Information:

A low-pass filter is a filter that allows frequencies below a cut-off frequency while filtering out frequencies above this cut-off frequency. For a simple series RC circuit, a low-pass filter can be created by connecting the input signal to the resistor and taking the output from the capacitor. The cut-off frequency ...

Abstract

The experiment is aimed at constructing a step-up transformer. This is due to the type of materials being used and the number of rolls that the wire is rolled on the U-shaped material. This can easily be related to the alternating current that is tapped from one source to the other. This current can easily be measured in respect to the size of the voltage that is alternated in between the primary transformer and that of the secondary transformer. The number of coils in the primary material is two; the other secondary coil has four coils. The material used to ...

Introduction 3

Background on Report 3
Current Technologies
Photovoltaic (PV) Solar Technology 5
Concentrated Solar Power (CSP) 8
Solar Heating and Cooling (SCH) Technology 10
Analysis and Recommendation 11
Conclusion 12
Figures and Tables
Figure 1: Diagram of a P-N junction in a Photovoltaic Cell 6
Figure 2: A Typical Parabolic Through CSP System 9
Figure 3: Wakiki Shore Apartments in Honolulu, Hawaii 11

Used in Contemporary Society

Introduction
The use of fossil fuels results in combustion gases which contribute to global warming. Furthermore, these combustion gases result in air pollution which is detrimental to the ...

Individual report

Introduction
The task of the following individual report is to discuss critically two questions using economic models and objectives. The first question is “The recent price wars in the supermarket and mobile phone industries have been beneficial to both consumers and their respective industries. The discussion of that topic is about the recent price wars between the UK supermarkets – the monopolists Tesco, Morrison, Sainsbury and Asda and the German supermarkets Aldi and Lidl. German supermarket gain the half of the British market by low prices for their goods and it lay the beginning of the price war. The ...

Final Report

Our goal is to design a system that would be used to measure the temperature by changing resistances. The system would work in a solid medium but we would also try to make it functional in liquid mediums such as oil, fuels and such other liquids. This instrument should be able to measure the temperature of the liquids from -259.15 °C to 400 °C and we should have a resolution of ±0.018 V.

Instrument Details

The RTD is made of platinum coated nickel and should be attachable to the oil tank. i.e, it should be resistant to vibration, high pressure, oil and heat (e.g. ...

Introduction

Hake is a financial services provider that offers homebuyers mortgage options which are considered to be cheap. It is a privately owned company managed by its founder and CEO, Alan Hake. The focus of this enterprise is to allow consumers to get access to home loans at a low interest rate. These goals can be achieved with the design, development, and implementation of an efficient computer network with the intention of controlling expense by keeping labor costs low. The company’s system will need to meet tight security guidelines. The security and privacy of the consumers’ personal information will be at the ...

There are several ways to improve the volley ball serve and increase the likelihood that it will result in an ace or a serve that cannot be returned and results in a point for the offensive team. The main goal when seeking to increase the likelihood that a serve results in an ace is to minimize the time the ball spends in the air and increase the speed of the ball. This will reduce the amount of time the opposing team has to react, forcing them to react faster than their normal reaction time would dictate. In this analysis of the kinematics ...

Real time kinematic of volley ball

There is several ways to improve the volley ball serve, that is time spend on air should be reduced. Due to this there won’t be any time to react for the opponent team. This will make the opponent team to react faster than the normal one. In this analysis of kinematic of volley ball, the ball spends in air should be reduced, when the serve of volley ball is made.
In order to setup the analysis of kinematic of volley ball, we should consider several variables in the analysis. The schematic diagram will show the top view ...

Lab Report: Renewable Energy Lighting System Design

Introduction
Communities around the country as well as around the world are setting sustainable development goals. Twidell and Weir (2006, 2) define sustainable development in general terms as “living, producing and consuming in a manner that meets the needs of the present without compromising the ability of future generations to meet their needs.” Renewable energy sources are critical for sustainability. Renewable sources like wind and sun are different from fossil fuels because intense human labor is not necessary. Renewable resources do not negatively impact the environment which is also an important factor for reaching sustainability goals. Twiddel and Weir ( ...

Impact of Macroeconomic Variables on My Business

Abstract
I examined in this report the impact that the changes on the different macroeconomic variables e.g., price level, interest rate, and exchange rate have on the economy. Also, an analysis of how fiscal and monetary policies of the Australian government are presented as these policies and variables influence the success or failure of my business, the CadsBerri. Then my analysis dwell on the net value model by Brandenburger and Nalebuff to show that rational strategy could help my business survive despite the uncertainties posed by the macroeconomic environment.

Introduction

My business is on manufacturing and exporting of good ...

Introduction

The paper involves the marketing of Gucci Premiere perfume for women in Spain. Currently, the global perfume market of Gucci is approximately worth $4 billion to $6 billion. Spain accounts for 20% of the world’s sales of perfumes. The demands for the natural ingredients which make the perfume have continued to increase. There has been an increase in the use of Gucci Premiere perfume for women as a luxurious perfume. The quality standard of the Gucci Premiere perfume for women in the market has increased compared to the last decade. The perfume market, in Spain, has many players who ...

Introduction

A voltage stabilizer is an electronic gadget found in most of the circuit board of home electronics. A voltage stabilizer can be found in computers radios phone chargers and also DVD players. This important gadget comprises of diodes, capacitors, transistors, resistors and a step-down transformer. The work of a voltage stabilizer is to provide a steady current to the electronic equipment for it to function efficiently. A simple model of a voltage stabilizer looks like the diagram below. Symbols have their usual meaning.
In the above diagram, a step-down transformer reduces 240V of alternating current to around 10V of alternating current at the ...

Module 6

Design of Synchronous Sequential Counters
ELEC201
Digital Electronics
Partner Name:
Objectives
The objectives of the laboratory were as follows:
Introduction
Counters are categorized under Medium Scale Integrated sequential logic circuits. The counter circuits consist of several flip-flops that have been cascaded together and may also have an additional combinational circuit. They are mostly used in application that involve counting where they are applied in either the measurement of time that elapses between two instances that are not known, or the measurement of the frequency of a particular signal.

There are several types of counters such as those given below

- Asynchronous counters
- ...

Geometry of Plane Shapes

This is a branch of mathematics that is basically concerned with shapes and their properties. The shapes involved here are plane shapes (geometry) which have to do with lines, circles, triangles, rectangles, squares and other polygons which include pentagons, hexagons, octagons etc. other types of shapes are solid geometry (including cubes, pyramids, prisms)
The general properties of planes shapes also called flat surfaces are that we can calculate their areas and perimeter or distance around the shape. We however cannot find their volumes and their total surface areas because their thicknesses (or widths or breadth) are really negligible compared ...

Executive Summary

For the purpose of writing a report on tourism marketing, we have chosen Singapore Airlines. The reason behind choosing this airline is because it is regarded as one the biggest airlines in the world and has its headquarters in Singapore. Singapore has always been a major attraction for tourists and those who visit Singapore must also travel via the national airline so as to make the journey more memorable. The revenues of Singapore Airline have always been growing, however, the recent rise in competition within the airline industry has led to low turnover ratios. A survey has indicated that ...

International Marketing – Iceland Supermarket

Introduction
Iceland Foods Ltd. is one of the leading names in the food retail sector in the UK. The company was founded by Malcolm Walker in 1970; and, since then, it has undergone consistent growth in its popularity, consumer-base, and profitability in the domestic market. Before, fridges and freezers came to be commonly used; it focused on selling loose frozen foods i.e. vegetables and meat. Later on, it worked on product development strategy by introducing some branded grocery items that proved to be a booster to its sales revenue. Within 46 years of its business life, the company has ...

Introduction

A refrigerator is an electrical device used in temperature maintenance below ambient temperatures. To achieve this function, the refrigerator should be able to create a heat sink at cold room temperatures a temperature that should be lower than the ambient temperature while at the same time also rejecting heats having higher temperatures than the ambient temperatures. To achieve this refrigerant is forced to undergo evaporation at temperatures lower than the ambient temperature(Griffiths, 1937). When the refrigerant is compressed at high pressure and condensing temperatures above the ambient temperature results in the loss of heat and condensation back to ...

TECHNICAL REPORT 2

REVIEW OF FOUNDATION SYSTEM FOR A BUILDING
For:
Introduction
This report outlines different types of foundations and their suitable application areas in construction. In addition, it presents the plan view, design considerations, the elevation and the significant information that are needed from soil investigations and geotechnical design. Soil investigation report outlines the outcome of the geotechnical examination report for the proposed building and complex in Dubai UAE (Peck, Hanson & Thornburn, 1974). The investigations were conducted in accordance with the conformation which is dated 8th April 2016. The aim of the investigation is to determine the conditions of both surface ...

BERNOULLI’S EXPERIMENT

ABSTRACT
Two fluid properties, the Bernoulli principle and the Venturi effect, were examined and analyzed in this experiment. A venturi meter was used to measure the fluid flow rate, velocity, and pressure of water (the fluid being examined). The results showed that the fluid pressure decreases as the fluid traveled through a smaller cross sectional area. The minimum fluid pressure (in effect, maximum fluid velocity) was observed in the smallest cross sectional area at position D (diameter 16 mm). The decrease in fluid pressure was compensated by an increase in the fluid velocity. With these two measured phenomena, both ...

Introduction about the Company

Honeywell is one of the globally leading US-based conglomerates, with earning revenue of $23.65 billion, as per 2001 available figures. It has numerous products, used in multiple areas of different industry segments and production facilities in all corners of the world. Aerospace is Honeywell’s leading industry segment where its experience of the line benefits the customers all around the world. Otherwise, Honeywell’s technology product range is quite varied. It is a leader in the manufacturing of technology products. Customers around the globe depend on Honeywell for its aerospace control technologies used in towers, houses and industry; automotive ...

Abstract

Permanent magnet synchronous motors (PMSM) are a type of motors that have permanent magnets mounted on the rotors instead of the rotor windings. This particular design gives the motor a few advantages over ordinary induction synchronous motors. The magnets attached to the rotor do not require excitation, which reduces the power consumption in PMSM. This gives the motor high operational efficiency and reduces the motor active diameter. PMSM are therefore associated with applications that require high torque but have limited operation space. The permanent magnets suffer from flux leakage and are therefore aligned in a pattern that minimizes flux ...

Project scheduling

It is difficult to determine the expected duration of activities of the project accurately. The triple time estimates give a reliable measure of the project completion period (Collins, 2011). The triple time estimates are used to determine the time, standard deviation and the variance for each activity as well as the entire project. The following formula gives the activity times:
Activity time = (Optimistic time+4×Most likely time+pessimistic time)6
Standard deviation = (Pessimistic time- Optimistic time)6

Network diagram

The above network diagram indicates that the project will be completed in 72.67 days. The total duration of the critical path ...

Introduction

Initially there were beliefs that, MMPs are jointly able to degenerate all constituents making up the extracellular matrix (ECM) together with basement membrane that confines their operations to tissue reconstruction as well as the preservation. Nonetheless, the contemporary studies also signify that MMP-1 is responsible for controlling the production or else the activation of the chemokines. At this point, it is critical to understand that MMP-1 is among other MMPs.
Similarly, the knowledge holds it that MMP- 1 cleaves a peptide bond beforehand a residue comprising of a hydrophobic adjacent chain, for instance Met and Leu. The other sideways chains cleaved ...