Plate Reports Samples For Students

[Subduction Initiation]

Abstract

The major purpose of this report is to explore the process of subduction initiation by looking at its implications. The initiation of subduction is among the main plate tectonic process hence it comes out as an important subject of study when exploring the geological structure of the Earth. In order to explore all the elements associated with this, the paper is categorized into topics that cover important aspects. First, it is important to study when and why subduction initiation begins since this will give a picture about its relation with plate tectonic movement. It comes out that ...

1. Introduction
Agriculture and other food products are dried for use. The agriculture grains are dried for future use or production process, in order to dry the agriculture products the sun drying has been used for many years. The sun drying dries the products in a open air condition with the help of hot sun rays. In past centuries the sun drying systems has been used. Most of the industries use mechanized drying instead of sun drying system. The mechanized drying uses boilers and fan to heat and force the air to the required part. The time taken for ...

Soap manufacturers develop various products that include conventional soaps and antibacterial soaps to address today’s microbial threats. Antibacterial soaps are developed based on conventional ones with antibacterial agents added to the product. These antibacterial agents must have the ability to kill germs, but should not give adverse effects to human’s skin and general physiology. Scientific approach to investigate the effectiveness of antibacterial soaps begins with the hypothesis that antibacterial soap reduces more bacterial contamination compared to the conventional (non-antibacterial) soap. The two hypotheses are:
- There will be decrease in bacterial growth variables (types, numbers of ...

Panther I.D.:

“The expression of ampicillin resistance and luciferase enzyme genes by E. coli transformation using the pUC18 and lux plasmids”
Abstract
The transformation process allows the uptake of DNA from the environment, with the incorporation and expression of genes. During this process, changes in the DNA of the receptor cell occur, producing some selective advantages in some cases, such as resistance to antibiotics. pUC18 and lux plasmids were used to determine the transformation process in Escherichia coli. Cells were made competent by the addition of calcium chloride and heat shock in order to induce the incorporation of the ...

2011 Tohoku Earthquake and Tsunami

Introduction

The Tohoku earthquake that occurred in the Pacific Ocean on 11th March, 2011 at a shallow depth of 32 kilometers is by far the largest earthquake ever recorded in the Japanese history and the fifth largest in the world. The earthquake was of 9.0 magnitude with its epicenter located 130 kilometers off Sendai, Honshu, the largest city in the Tohoku region. This earthquake set off devastating tsunami waves travelling like a jet plane at the speed of 700 kilometers an hour (Sorkhabi, 2011). The waves that reached the altitude of 40.5 meters travelled up to 10 ...

The theory of plate tectonics describes the wide­scale movements of the lithosphere of

the earth. The model is based on the ideas of continental drift, which first gained acceptance in
the early 1900s. The geoscientific community granted the theory even more validity after the
notion of seafloor spreading appeared in the late 1950s. Basically, the lithosphere is not whole
but instead is separated into either seven or eight major plates, depending on the definition that
you use. Every meeting point between plates has its own relative movement, either transform,
convergent or divergent. Volcanic activity, mountain creation and earthquakes all occur along
these edges, and the plates ...

Introduction and Background

In assessing the impact of microbes in the New South Wales (NSW) health system, it was discovered after laboratory testing evaluating Part A and B categories different types of colonies were discovered, for laboratory 1 evaluations. In laboratory 11specimens used in this experiment were blood, urine, cerebrospinal fluid; sputum, swabs from and

Mucous membranes.

Bacteria colony morphology:-. E Coli. This bacterium appeared to be creamy, shinny and rose to a level of 2-3 mm. M Luteus. This one was yellow shinny circular and rose to 1-2 mm. Fungal colony morphology; Saccharomytes cerevsaie ( yeast) and Aspergillus nidulans ( Mould ). Precautions must be taken while ...

UNKNOWN #16

SUMMER 2013
INTRODUCTION
Purpose
The purpose of the lab is to separate characterize and identify microbes from unknown mixed culture using the morphological and biochemical methods.

Theory

The process of identifying bacteria is a systematic and careful process which uses various techniques to narrow down the bacteria types which are present in an unknown culture of bacteria. This process produces advantages for many factors of research of microorganisms and assists in the proper treatment of patients (Aneja 10). Several tests were performed to give the fermentation abilities, availability of specific enzymes and specific biochemical reactions.

MATERIALS AND METHODS

The experiment started ...

Identification of mystery microbe based on its morphology and biochemical properties

The experiment was conducted to detect the species of a given mystery microbe. The microbe was subjected to a battery of tests in order to identify its physical and biochemical characteristics. Based on the tests, different possible microbe species were eliminated to finally arrive at the right conclusion. The possible microbes included Escherichia coli, Providencia alcalifaciens, Enterobacter aerogenes, Staphylococcus epidermidis, Klebsiella pneumonia, Micrococcus luteus, Serratia marcescens, Mycobacterium smegmatis, Sarcina aurantiaca, Pseudomonas aeruginosa and Bacillus licheniformis.
The first test conducted was to detect the Gram staining properties of the given microbe. This helped in identifying whether the given microbe had a thin ...

Abstract

The report presents the results of a microbiological experiment to confirm the hypothesis that as leftover food sits out over time, the number of bacteria in the food will increase. The study was undertaken to indicate the risk of bacterial contamination and the importance of proper storage technique. The study was performed using a liquid food (corn tortilla soup) which was exposed to the external environment at room temperature. The control group in our experiment was the same food stored in a zip lock bag and refrigerated.
The soup was tested over a period of time, which served as the independent variable, ...

Lab partners

The transformation of bacterial cells using Puc18 plasmid as a vector
Abstract
In molecular cloning experiments, the DNA to be cloned is obtained from an organism and then broken into smaller fragments through digestion with restriction enzymes. The fragments of restriction enzyme digestion are then ligated /combined with some vector DNA to produce recombinant DNA molecules. These recombinant DNA molecules are then introduced into a host organism. When the host organism replicates, the recombinant molecule is replicated together with it. With time, large populations of transformed cells or clones are generated expressing the genotype and phenotype of the inserted ...

14th April, 2011.

Objectives/Aims

1) The aim of the experiment was to scrutinize food samples for the presence of microorganisms using the Australian Standard (AS) techniques to establish quality and safety of food produce for consumption.
2) The experiment is also aimed at comparing standard and new techniques of food sampling. This will assist in establishing the most efficient, convenient, cheap, reliable, sensitive and easy to use technique in analyzing food samples for the presence of microbial organisms.

Introduction

Microbial organisms in food can either be useful or poisonous if consumed. For years now, microorganisms have been used in the ...

Abstract

In this lab, an RC circuit was set up and powered using a square wave from a function generator. The output was manipulated and examined and the results viewed on an oscilloscope. On the oscilloscope, the energy was seen in the way it is stored, delivered and manipulated in circuit elements. In the lab session also, the usefulness of an oscilloscope as a high-speed voltmeter was learned. How it monitors signals occurring in time intervals of microseconds and milliseconds.

Introduction

Electric circuits perform by separating the positive (+) and the negative (-) electricity. It works against the Coulomb forces of attraction ...

TA
ABSTRACT – Genetic engineering now has straight forward ecofriendly strategies to produce transformation in plasmids. The transformation process allows engineers to introduce DNa with specific desired capabilities into a host plasmid. In this way plants can be created that are able to resist a particular enemy or stressor without having to use toxics like herbicides and insecticides. The bacteria E. Coli was used to determine whether it can be made resistant to ampicillin or not. AmpR was integrated into the host cells and the tracer, GFP was used to identify expressed cells. The laboratory demonstrated that transformation by plasmids so ...

Theb Great 1964 Alaska Earthquarke

Introduction
The Prince William Sound region in Alaska went down in North American books of history on March 27, 1964 for experiencing a fatal earthquake. The magnitude of the earthquake rated on various scales, but the moment magnitude rated it at 9.2mm. The epicenter was located approximately 10km to the east of college Fiord, Valdez 90km to the west of the epicenter and anchorage 120 Km to the east as fig 1.1 shows. The bearing of the epicenter was Lat. 61.04N, Long. 147.73W with an estimated depth of 25KM (American Society of Civil Engineers & Schiff 1991). At the time ...

Purpose

Materials and Methods
Gram Stain: the test was done to differentiate Gram-positive from Gram-negative organisms. A drop of the unknown 300 was suspended on a slide and the culture spread to an oven thin film. The culture was air dried and fixed over a gentle flame. Crystal violet stain was added over the culture and allowed to stand for 60 seconds. The stain was poured off and rinsed gently. Iodine solution was added on the smear, allowed to stand for 60 seconds and the stain poured off. The slide was rinsed with running water, and a few drops of decolorizer solution ...

Introduction

Bacillus Subtilis are the organisms that are aerobic, Gram Positive, spore-forming belonging to the Bacillus genus. The organisms are together with other species that are closely related play a crucial role in disease, food poisoning as well as food spoilage. Lack of methods that are standardized for the identification of the organisms whether coming from the food or environment has made the tests to be difficult. Use of morphological as well as physiological tests have offered the best ways to identify organisms in the laboratory although there are inconsistent and lack of reliance in these methods.
Identification of an ...

Introduction

Field density testing is significant for assessing the soil properties of a site identified for a project. The assessment of soil property done through field density testing is aimed a verifying that the soil contained the required properties for the type of project to be constructed at the identified site (Thiers and Donovan 45). This lab uses the Sand Cone Method to verify the compaction of fill material and determine if the soil meet the required compaction with a design unit weight of 2,000 kg/m3. The aim of the experiment was to determine the dry unit weight, to ...

Abstract

Transformation remains, and hugely significant tool in extending the borders of life sciences and medicine. It can be referred as fixing intracellular DNA into a bacteria or organism through the vector, thus transforming it. This paper uses plasmid pUC18, self-reproducing circular/spherical strands of genes that may be modified. After the bacteria absorb the vector, some proteins not usually synthesized will occur. In this study, a system has been developed to monitor the transmittance of different DNA (genes) from a genetically transformed strain of Saccharomyces cerevisiae to E. coli. This mechanism is centered on yeast strains that contain several integrated ...

Lab report #

Introduction
In recent times, synthetic antibiotics have caused resistance in microorganisms and also, have shown unwanted side-effects. This has demanded for alternate therapies to combat infections. Scientists have developed interest in plant extracts, especially the ones that are traditionally used as spices, for new antimicrobial agents. Spices are traditionally used to give a distinctive flavor to the food but, they also contain potential antimicrobials which are also documented in literature. Even Louis Pasteur demonstrated the antibacterial effect of garlic and onion extracts. Salsa contains three main ingredients which have potential antimicrobial compounds. First, Lemon (Citrus Limon) is reported to ...

Day 1 - Cell Culture: At First an LB/amp plate was labeled with initials, the date, the name of the bacterial strain to be used (BL21) and the plasmid (pDHFR). Then 10 uL of reconstituted BL21-pDHFR was pipetted onto an LB/amp plate using sterile tip.The bacteria was streaked into four quadrants of the plate and after this it was covered immediately to avoid contamination. The plate was placed upside down inside the incubator overnight at 37°C and once colonies have grown to ~1 mm in diameter, they may be stored in a sealed bag upside down at 4ºC ...

Introduction:

When opening a new restaurant there are a number of factors that one needs to address that help in setting the price of a plate of food. It is important to examine ones competition then analyse data collected from them on a number of issues. For example, issues of food quality will cover aspects of presentation, portion size and consistency. Service will focus on day’s open, hours of operation, service style, quality of service, speed of service and extra services offered. Issues of decor and comfort will address the dynamism of exterior shape of appearance and theme, interior appearance and theme, atmosphere, ...

1. Natural disaster due to landforms and processes: Earthquake Magnitude 9.0
Location: Tohoku, Japan/March 11, 2011,
Geologic/geomorphic setting: Japan sits right where it is affected by four tectonic plates. The four plates are the Pacific Plate to the east, the Philippines Sea Microplate to the south, the Eurasian Plate to the west, and the North American Plate to the north.
Triggers: The earthquake hypocenter is where a slip occurs on a fault plane between the North American and Pacific Plates. The Earth Observatory Singapore explained that a megathrust occurred because the edges of the two plates stuck together causing ...

Question 1: Separation of mixtures

1. Extraction

This is a method of separation of two immiscible solvent phases. It is the best method for the separation of a mixture of Cyclohexanone and Acetone (miscible)

Reason:

Cyclohexanone is insoluble in water while Acetone is miscible with water. A mixture of the two compounds forms two distinct layers in water. Distillation cannot be used because the two compounds are highly flammable.

Procedure:

In this method of separation, water is added to the mixture. Acetone completely mixes with water while cyclohexanone does not. A funnel is then used to separate the two.

(Note: the colouration is ...

Abstract

Handwashing is an important process in controlling microorganism transmission and infectious diseases. The purpose of this experiment was to determine the effectiveness of different antibacterial hand cleaners (soap, alcohol hand sanitizer and ethanol soaked wipes) on killing bacteria. Hands were sampled without cleaning with antibacterial hand cleaner (control), and after cleaning with antibacterial soap, alcohol sanitizer, and ethanol soaked wipes. Samples were taken with a sterile cotton swab and inoculated on agar plates. Each experiment was done three times. Colonies were counted, mean values and standard deviation were calculated, and data was reported. Alcohol and sanitizer and ethanol soaked ...

Abstract

Permanent magnet synchronous motors (PMSM) are a type of motors that have permanent magnets mounted on the rotors instead of the rotor windings. This particular design gives the motor a few advantages over ordinary induction synchronous motors. The magnets attached to the rotor do not require excitation, which reduces the power consumption in PMSM. This gives the motor high operational efficiency and reduces the motor active diameter. PMSM are therefore associated with applications that require high torque but have limited operation space. The permanent magnets suffer from flux leakage and are therefore aligned in a pattern that minimizes flux ...

Scientific Report

ID

Partners

TA

Abstract

The experiment was performed to analyze the outcomes of temperature on the ability of fungal and bacterial amylase to breakdown starch to maltose. Therefore, the study will reveal the optimal temperature for amylase activity. The initial steps include preparing the materials and tools used during the experiment. A timetable for comparing temperature and function was generated. Test tubes and plates were properly labeled. Iodine was needed for every spot plate so that the fungal amylase, bacterial amylase, fungal amylase and the starch solution can be added to the iodine in a time and temperature dependent fashion. Observing ...

Abstract

The objective of this experiment is examination of diffraction and interference of visible light when it is passed across narrow double and single slits. In order to do so, the diffraction patterns of light will be investigated through collection of pertinent data relating to the distance between pattern’s centres and maxima. Of particular interest in this experiment is the varying intensity of light and respective positions on the display screen as ascertained trough measurement and calculation of width and separation distances for respective patterns. The experiment concludes by highlighting the wave attributes of visible light as manifested in ...

Introduction

This experiment is used to study the application of Newton`s second law of motion on water jet out of the nozzle. Water under known pressure coming out of a jet of a known diameter tends to gush out at a relatively high velocity. This experiment is all about the study of the motion of water and all the forces involved.

Background information
The impulse momentum principle state that the state of rest or uniform motion of the body takes place in the direction of the externally applied force and the magnitude of the force is equal to the rate of ...

Abstract

Amylase from Bacillus Subtilis and Aspergillus oryzae were studied as representative candidates for bacterial and fungal enzymes, respectively. The activities of these two enzymes were studies comparatively over a period of 10 minutes and at temperatures of 0, 40, 60 and 95°C. The experiment was conducted to find the most effective temperatures for bacterial amylase and fungal amylase to catalyze starch hydrolysis. The data suggest that fungal enzyme was relatively more active, particularly in the first 6 minutes, than the bacterial counterpart at 0°C.
On the other hand, the fungal enzyme activity deteriorated more rapidly than that ...

Dr. Professor

Paracetamol is crystalline white power with the scientific name N-(4- Hydroxyphenyl) acetamide. The chemical formula is C8H9NO2 and its structure is

Properties

The melting range of paracetamol is 168 to 172oC and its solubility is 14.3g / dm3 of water and ethanol’s 100g / dm3. It is insoluble in ether and dissolves quickly in chloroform. It dissipates uv absorption minimum in aqueous acidic medium at 245 nm and has uv absorption maximum in aqueous alkaline medium.

Assay

Through titration, paracetamol is analyzed using ceric ammonium sulphate. In the titration, Ferroin plays the role of indicator. It is also assayed ...

Cell culture is an in-vitro technique of cultivating cells under controlled conditions and in sterile conditions. The technique was first developed by Ross Harrison in 1907. During the process of cell culture, the cells are detached from their tissue of origin and segregated from each other, either by mechanical or enzymatic means. The detached cells are then transferred before culturing them in cell culture plate or flask. The first generation of producing cell through this method is called primary cell culture. The cells from the primary culture are transferred to a new culture plate with a fresh medium to ...

Advantages and disadvantages of having a circumcision

Various persons and groups have advocated for and against circumcision, often citing various advantages or disadvantages to back up their respective positions. Some advantages according to Elist (2013a), the National Health Service (NHS) (2016) and Webmd (2014) include the reduced risk of developing urinary tract infections (UTIs), sexually transmitted diseases (STDs) especially HIV, cancer of the penis and cervical cancer in female partners. It also acts as prophylaxis against balanitis, balanoposthitis phimosis and paraphimosis as well as facilitates the maintenance of penis hygiene (Elist, 2013b; NHS, 2016; Webmd, 2014; Wiswell, 1997). Disadvantages of the procedure include complications which may ...

My Name

Shell and Tube Heat Exchanger Lab Report
Objectives
Introduction
A heat exchanger refers to a gadget that aids the transfer of heat from one fluid to another. The fluids involved can either be in direct contact or separated to avoid mixing (Ramesh & Sekulic, 2003). They are in common use in sewage treatment, natural gas processing, petroleum refineries, petrochemical plants, chemical plants, power stations, air conditioning, refrigeration, and space heating. A perfect example of a heat exchanger is in the internal combustion engine (ICE) (Hiereth & Prenninger, 2010). In such a situation, a circulating fluid called engine cooler flows over the ...

Purpose

This experiment was intended for determining the thermal conductivity of aluminum metal.
Apparatus
The following materials were used in the experiment:
Variac
Timer
Digital thermometer
2 digital multimeters

Beakers

Tin can
Double throw switchers
Mercury thermometer
Heating plate
Wire
Ice cold water
Introduction
Heat flows from a hot region to a cooler region. However, the rate of heat flow varies from one medium to another. Heat travels through different media such as air, solid, and liquid. The mechanisms of heat transfer differ from one medium to another. For example, heat travels through a solid object by conduction while it travels ...

< Microwave Oven Usability Report >
< Lecturer’s Name and Course Number>

Introduction

Microwave ovens are appliances used to cook food. They utilize microwave electromagnetic energy (EME) in their operations (Lee 2010). Many modern microwave ovens are automatic and programmable. The ovens, therefore, enable individuals to cook different types of meals by letting them input the desired cooking time and power.
Microwaves ovens have a user interface that allows users to instruct the artifact on what to do with the food. The ovens usually have a door with a knob to enable easy opening of the panel. The panel ...

Organism # 6

Molecular Biosciences 101
Section #
Purpose
Materials and Methods
Gram Staining: Three circles were marked at the bottom of a clean glass slide and they were labeled as gram(+), gram(-) and unknown respectively. The three labeled circles were then inoculated with microorganism 6 using an inoculating loop. The bacterial smears were then air dried and heat fixed over a gentle flame. The slide was then flooded with primary stain, crystal violet for a minute by placing it on a staining rack. Excess crystal violet was washed off with a gentle stream of water. Thereafter, gram iodine was added and ...

Caffeine is present in tea leaves and can be readily extracted. This is the producer that was demonstrated in this laboratory experiment. In the laboratory experiment, the teabags were heated to ebullition for five minutes. The ebullition was sequenced by an extraction which applied dichloromethane. All of the washings occurred in a separator funnel. The residual substrate was subsequently evaporated up to the point of where the crude caffeine remained as a residual. Sublimation was applied in order to separate the purified caffeine from the crude caffeine. The mass of the sublimate is was 0.0035g. The percentage yield of the caffeine ...

<Student’s name>

Part 1. Solar Panel History

The history of Solar panels takes it beginning from the 7th Century B.C. Now, the energy sector of economy has the greatest impact on our lives. Power supply is the basis of the normal functioning of any production, and, consequently, the entire human civilization. Heat and light homes, work machines and units in production, traffic and rural suffering - all these many faces of Energy. Various technological advances have already become part of life for us, but they are possible only when adequate and affordable energy supply, due to the development of alternative energy sources, ...

Affiliated institution

Geothermal Binary Rankine Cycles
Abstract
This report is for a LOW-BIN (Efficient Low Temperature Geothermal project. The main objective is to study and recommend specific optimal Rankine cycles using water as the primary source of heat. The water is at a temperature of 1600C. This Rankine cycle is using R134 as working fluid for the geothermal power machine. This project is supposed to generate electricity from low temperature resources with profitable operation down up to around 600C. The main Rankine Cycle parameters and components are idealized. This is as found in the shell, the tube condenser and the heat ...

Introduction

The most widely used model when investigating the breast cancer is T47D cell lines. These cell lines are easily spread, easily manipulated genetically and when used in the experiment, it provides good results. They have been used to examine new therapies and the and the breast cancer pathobiology1.
Over many years HER2 has 25% - 30% of human breast cancers have been caused by gene amplification. The monoclonal HER2 and the EGFR are the two HER2-targeted therapies that are used for approval in the most clinics. During growth, HER2 is used to regulate the cell growth and assist ...

Effectiveness and action of different antibiotics on bacterial cells

Introduction
Antibiotics are used to kill microorganism or inhibit their ability to multiply (DIANE Publishing Company 73). Different antibiotics kill bacteria and other microorganisms with varied effectiveness. A simple mechanism of determining the effectiveness and action of antibiotics on bacteria is using the zone of inhibition method (DIANE Publishing Company 112). This experiment requires application of an antibiotic chemical to an inoculated plate. The culture in which bacteria are to grow and reproduce is then incubated after which observations are made to identify the zone of inhibition. A clear zone on the plate is an indication that the ...

Abstract

In this experiment, 5 mL of toluene solution was transferred in a 25 mL round bottom flask and then 0.40 g maleic anhydride and 0.4 g E, E-2, 4-hexadien-1-l added. Ethyl acetate was used as a solvent to carry out a TLC analysis on the mixture produced after reaction completion mainly to determine the presence of any starting material in the mixture. The reaction mixture was then slowly cooled to room temperature. There was crystallization taking place as the reaction cooled, white crystals were formed.
The mixture was further cooled in for 10 minutes in a water bath to promote crystallization to ...

Use of Fossil Fuels for Power Generation and the Need for Renewable Energy

According to Nelson (2011), more than 85% of the world’s energy consumption, which is estimated at 520 exajoules, is generated through the burning of fossil fuels such as petroleum, natural gas and coal (p.19). Electric power generation from non-renewable sources will, unequivocally, result in their exhaustion and creation of a major energy crisis. For this reason, it appears primordial to shift in a greater scale to alternate power generation, such as solar, wind, hydroelectric, etc. Amongst these, Sorensen (2011) explains that though hydroelectric power does represent one of the major forms of power generation, its growth is stagnant ...

TECHNICAL REPORT 2

REVIEW OF FOUNDATION SYSTEM FOR A BUILDING
For:
Introduction
This report outlines different types of foundations and their suitable application areas in construction. In addition, it presents the plan view, design considerations, the elevation and the significant information that are needed from soil investigations and geotechnical design. Soil investigation report outlines the outcome of the geotechnical examination report for the proposed building and complex in Dubai UAE (Peck, Hanson & Thornburn, 1974). The investigations were conducted in accordance with the conformation which is dated 8th April 2016. The aim of the investigation is to determine the conditions of both surface ...

Thermal conductivity is defined as a material’s property to conduct heat. Heat transfer across materials occurs in materials that have lower thermal conductivity and transfers faster in materials with high conductivity. It is important to determine the thermal conductivity of materials since different materials are used for different applications. For instance, materials with high conductivity are more efficient when they are used as heat sinks since they can conduct heat away faster. Those with lower thermal conductivity are often used as insulators (Callister 78).
The classical transfer of energy happens through conduction, radiation, convection or combination of all ...

Wet Sieve Analysis

Wet sieving analysis of soils is used to analyze particles that contain large amounts of silt and clay. The soil particles are washed to ensure that the fine-grained particles are separated from the coarse-grained ones. The extremely fine particles normally clump together and have difficulty in passing the # 200 sieve. In this experiment, the classification of soils is done in order to determine the percentage of soil particle that passes the # 200 sieve. The Wet analysis is used to determine the fine particles in the soil sample (“45Th Anniversary of The Journal, 16)

Materials

Mortar and pestle
Mechanical shaker
Squeeze ...

An earthquake of magnitude 7.0 in Richter scale, which lasted for the duration of 30 seconds, hit the Haiti region on January 12, 2010, and claimed an estimated 222,570 deaths. Haiti occupies the west part of the island of Hispaniola, one of the Greater Antilles islands, situated between the Puerto Rico and Cuba. The fault zone is called Enriquillo-Plaintain Garden fault, runs some 16 kms from Port-au-Prince, and at the intersection of the regions separating the Caribbean plate and North America plate.
According to the estimation of the United States Geological Survey (USGS), several million of earthquakes ...

First thing, we needed to know was the measurement associated with the shear box including the height and mass, as well as cross-sectional dimensions to determine the normal force. Next thing to do was preparing a 200-gr sample of dense soil so we could compact it later into the box. The extracted sample was reckoned among the well-graded sands. The soil sample was then compacted into three equal layers such that the middle layer could be placed almost at the half height of the box where shear plane has been designed to be. A general planar view of this configuration ...

Introduction

Globalization has opened up borders and rendered it possible for globally competitive companies such as Khmer Foods Group (KFG) to leverage the best that this new reality presents. However, mounting global operations necessitates managing difficult geopolitical, regulatory and cultural challenges, which, fortunately for KFG, should not be a challenge, given the company’s long experience and high standards. This report gives a detailed account of Brazil’s business environment, and assessment of its suitability for KFG’s purposes. The report includes an analysis of the economic, political, legal, cultural and ethical factors relevant to KFG’s possible operations in the country, ...

Project Title: Selection Materials

Module Code:
Project Due Date:
DCU Statement
Plagiarism means presenting another person’s words, ideas, designs as your own word. Plagiarism comes in a different form, like copying text, diagram, formulae, etc. Plagiarism is a serious offence. Plagiarism is referred to the disciplinary committee of the university. Committee will take the serious action on the plagiarized materials.

Aim and Objective

This project is being aimed to model the stress the board by considering a typical beam supported by the equal pressure on the bottom and it must withstand a point force.
1. Introduction
The material selection is the process of designing a ...

I visited Nizi Sushi Japanese Bar and Restaurant in Newark. The intention of this visit was to identify the Japanese culture food culture abroad. While a number of reviews about Japanese Restaurants in Japan show that they tend to specialize of a particular variety of food, I realized that the restaurant had a lot of foodstuffs to offer. Some critics assert that Japanese Restaurants abroad tend to serve a wide range of food, but maintains the Japanese culture (Ashkenazi, Jacob & Ashkenazi, 2013). Additionally, I needed to know the source of Japanese food here in Newark and the major population visiting these joints. Clearly, ...

Microbiology laboratory report

Abstract
Bacteriophages are intracellular parasitic viruses that infect bacteria to carry out their multiplication. During the lytic infection cycles, phages lyse the host cells forming a clear zone called plaque on the agar media. The experiment is aimed to measure the number of plaques created when the virus T4 infects the host bacteria and their genetic material integrates into the genetic material of the host cell. This happens because the E.coli becomes resistant to T4 bacteriophage. The T4 phage was diluted in a test tube and then E.coli bacteria was added in the tubes. The mixture was poured with soft ...

I. Thesis Statement
Given the space limitations in the Shelton Theater, their production of Noises Off! Represents consummate skill in the conversion of one environment to suit the needs of a challenging play.
II. Overview
1. The name of the play is Noises Off!.
2. The author of the play is Michael Frayn.
3. The Shelton Theater assembled the company that performed the play.
4. I saw the play at the Shelton Theater.
5. I saw the play on Friday, January 3, at 8:00 PM.
6. The ticket cost $10 plus online ...

Summer 2013

Abstract
Reliable techniques to meet the needs of patients with peripheral nerve repair injuries need to be refined. One of the strategies often used is to create a nerve guidance channel or build a nerve conduit Silicone is has been found to work well as a conduit from an injury for regenerated axon cells if it does not contain foreign components. The cycle of the cleaning treatment was repeated until the Pentane-Acetone-Heat Procedure was successful and the plated cells survived for several weeks. The duration of the plating and cell count using the cleaned silicone lasted from May 3, 2013 to ...

Introduction

The purpose of this experiment is to assist one to learn how different equipment in the laboratory is being use when carrying out the experiment. It tests the level of accuracy required when using different apparatus for measuring the volume. For very approximate result of volume, a beaker or conical flask is preferred when measuring volumes of liquids.

Accurate methods of measurement

This is done by the use of burette, conical flask and pipette. These measuring apparatus are discussed below.
When a much more accurate measurement is required, always measuring cylinders are preferred Measuring cylinders, which are much more accurate than beakers and conical.

Also volumetric pipettes and volumetric flask the mostly used apparatus used when measuring accurate volume.

...

Introduction

Heat of vaporization and vapor pressure are the two essential properties of a liquid in thermodynamics. The vapor pressure of a substance is the measure of the tendency of its molecules escaping (Blauch). The heat of vaporization is defined as the amount of the attractive energy that exists between molecules in the liquid and has to be overcome in order for the molecules enter the vapor phase. When a liquid sample is put into a container, there is the tendency for the liquid to evaporate. Liquid molecules escape from their state into the gaseous state. When the liquid is put in a closed container, ...