Vehicles Reports Samples For Students

Introduction

A spaceship is a special aircraft designed and built to fly in the outer space. Spaceships are used to explore the universe, collect weather information, observe the earth and launch communication satellites. Currently, there are over seventy countries that have space programs. The notable ones include United States, Russia, China, India, United Kingdom and North Korea. These countries spend billions of dollars in space technology each year. It takes an average of about twenty years to build and launch spaceship into the space. This is because space ship building requires the highest level of precision. This time can be reduced ...

Similar to any other country that has well-established legal framework and political stance, Costa Rica is a country that has well developed policies and laws that apply to the foreign tourist like me. Prior to my travel to Costa Rica, I will be required to comply with some legal requirements as a way of ascertaining security and fulfilling the requirements set by this country in regards to the visitor foreigners. In regards to the aforementioned, this paper will insightfully present a report that establish and clearly defines the requirements I will need to comply with prior and subsequent to my travel. In ...

Simply put, a three phase electric power transmission is a means of transmitting electric power using three wires. Transmission of an ac (alternating current) relies on this bit of technology. Also a type of polyphone system, it is the most widespread means used by electric power distribution grids all over the world to distribute power.

This method of power transmission was introduced by Nikola Tesla in between 1887 and 1888. The workings of this system are quite easy to grasp. There are three circuit conductors which carry three alternating currents that are of the same frequency and which also reach their immediate ...

Appeal to the Audience

The report talks about the importance of controller tunings in controlling industrial equipment. According to the report, controller valves are important in controlling the flow rat, the amount of input in machinery and also the amount of output of the machine. The importance of the controllers can be seen in controlling a water cooling machine in which case a slow controller would be inappropriate to be used. The importance of a feedback controller on the other hand is the essence that it enables the determination of an error that may occur between a set point and the process value hence determining the output ...

Introduction

Adverts are part of our everyday lives. As one of the most effective forms of mass communication, adverts are essentially designed to attract people’s attention and draw them towards a certain product or service that the creator of the advert is selling. The last century has seen individuals and corporations perfect the art of advertising and currently, the advertising sector is a multibillion industry. Exquisite adverts grace our television screens, magazines, newspapers and roadside billboards urging us to buy certain products or services. To appeal to large audiences, the developers of adverts usually utilize fallacies such as pathos, ethos and ...

Individual Report – Marketing for a New Product.

The service “Share&Go” is an innovative solution that is offered by the taxi service company. It uses the existing fleet of the company as well as its drivers to provide a new car sharing service to its customers. Customers can access the service through a mobile application or directly through the website. The idea behind is to give people an opportunity to split the payment for taxi rides between several people, even if those people are not travelling as one group. Customers can request a taxi by indicating the pick-up point and the final destination, as well as the possible tolerance time. ...

Electrostatic Precipitator Electrostatic precipitators are used to remove dust and other particulates from smoke and exhaust fumes. It used to minimize air pollution and protect the environment. The precipitator consists of a high voltage wires that are fitted across the chimney. The wires are negatively charged using voltage of 50,000V. As the smoke passes through the chimney, they are negatively charged by the wires. The smoke becomes negatively charged because electrons are passed to it from the wires. The negatively charged smoke particles are attracted to the positively charged metal plates that are found on the upper side of ...

1. Inverted as magnification is negative.
2. Real Image as it can be projected on a screen.
3. Two reasons.
. A ray passing through the centre of either a converging or diverging lens does not change in direction.
.A ray that enters a diverging lens by heading forward the focal point on the opposite side exists parallel to the axis of the plane itself.
4. Magnification is negative as the image size is less than the object size itself.
5. They are all equal and there are no variations in the result.

Answers on Experiment: 13( As per as data given)

1. Image is upright ...

Introduction

Faster travel time, a feat of human imagination and a masterpiece of engineering. These are but some of the things that airplanes embody in the world. While there have been many records and variations throughout history of emulating flight, it was the Wright Brothers that finally made modern aircrafts possible back in 1903 . Since then the “aeroplane” has been used in many situations of human history. Such situations include public transportation, combat and even entertainment.
This invention did not come without a price however; just as when dynamite was used in manners that were against the wishes of Alfred Nobel (leading ...

Part 1Report introduction

The profile of the company is that it is an iron sheet manufacturing company located in the industrial area in the city. It has several branches in the town that are involved in the distribution of the iron sheets. The various departments are located at the branches due to the need to coordinate activities at a branch level. The manufacturing site has employees who work in shifts of the day and night. The history of the industry is that it has progressively shown an improvement in protection of workers. This is by providing them with the protective gears, which was ...

Executive summary

The first part of the paper carries the introduction. Reflective techniques are discussed followed by the problem statement. This section contains the rules and a description of the simulation game. The approach and analysis section follow. Self reflection is defined, and the associated theories are discussed. The next section is on critical incidents. Three incidents are discussed, and they are related to reflection theories. Mini concussions follow each of these incidents. After this, the overall conclusion is last.

Approach and analysis techniques.4

Critical incidents analysis6

Works Cited9

Appendix..10
Introduction
Reflection techniques are critical in assimilating a learning experience. They enable learners to digest the materials ...

Introduction to Singapore as a Business Destination

The Republic of Singapore is a sovereign island country found in South East Asia (Abshire 4). The country is located 137 kilometers north of the equator on the Malay Peninsula (Abshire 5). The country is composed of the main Singapore Island as well as more than 60 other small islets (Abshire 5). Singapore borders the Peninsula of Malaysia to the North and the Rau Islands of Indonesia to the south (Abshire 6). According to the 2012 population reports, Singapore has a population of about 5. 3 million (Abshire 21). The official languages are English, Malay, Tamil and Mandarin (Abshire 55). Buddhism ...

Introduction – Situation

The purpose of this document is to prepare the detailed negotiation plan and risk assessment for the negotiation of the Toyota Rv4 purchase with one of the medium-size dealers in the area and the maximum budget of USD$ 20,000 available immediately. The negotiation process will be done within a given timeframe of two days that will include the first stage of negotiation and will potentially extend to the second negotiation round that will depend on the trade-off and negotiation priorities. The conclusion and signing of the deal are not included in the scope of this document as the purpose ...

Acronyms and Glossary

OSI – Open System Interconnection
UDP – User Datagram Protocol is one of the important transport layer protocol used for internet that allows computer applications to send messages.

TCP – Transmission Control Protocol is one of another internet communication protocol

DSL – Digital Subscriber Line is a technology that provides an internet access and transmits digital data over the local telephone line.

UTP – unshielded twisted pair widely used for local area networks

Hub – A hub is a device to connect multiple Ethernet devices
RJ45 – A connector standard used for Ethernet connections and telephone cables
Introduction
Lindley Hall is a steel and limestone building and has 5 stories. The client wants to connect approximately 1000 computers in the building. Out of these 1000 computers, ...

Companies face many problems in their operations. These problems are varied across the companies. The first company is AIG, and its problem is low staff morale. The morale problem is due to the pressure to turn around the nature of its operations for profitability (McIntyre, 2010). The second company is United Airlines. Its problem is poor financial performance. This scenario has been witnessed due to negative reservation experience and high costs and fees. The third company is Level 3 – a broadband network company. Its major problem lays in its business strategy which has led to integration challenges with other business ...

1. When the load on the specimen increases, the compression on the specimen increases. The longitudinal strain increases by increasing of the load value. The young’s modulus gets increases with the longitudinal strain. The load compresses because of the load.
2. When a compressive force acts on the specimen, two types of stain occur one is lateral strain and another strain is the axial strain. The specimen undergoes lateral strain to some extent. The lateral strain occurs due to the overload applied on the specimen, but the specimen undergoes more longitudinal strain than the lateral strain. The specimen ...

Vancouver Harbor Airport is on the Sea Island, across the Fraser River in Coal Harbor. The actual Vancouver Harbor Airport ship docking area is 49017`26.44”123007`08.90”W of Canada. The Vancouver Harbor Control Tower, situated on top of the Granville Square building should be the first directional aspect to consider. The nearest airport to Vancouver Harbor Airport is the Vancouver International Airport that has it is located within approximately 8 miles (12km) South-southwest of CXH. The airport is relatively at low elevation of approximately (0), and it recommends that planes can only take off at relatively lower ...

Please nothe that while Wowessays.com offers a database of 100 free essays, you can still get a unique paper that no one has used from us.

Abstract of the Tensile Test

Tensile tests are instrumental in understanding the properties of various materials and the way will behave when subjected to a load. Four different materials were subjected to tensile test using universal testing machine. The materials that were tested were: steel and nylon. The data obtained from each experiment was used to calculate and graphically determine some of the valuable properties of the materials such as, yield stress, ultimate tensile strength and young’s modulus. The material properties obtained from the various test were compared with the theoretical values and also amongst the materials themselves. The tensile test results showed that ...

- Introduction
The subject of this study concerns some of the most serious pavement deficiencies: alligator cracking, bleeding, and potholes. Alligator cracking and potholes can often shorten the pavement’s lifespan. Bleeding more often impacts road safety; bleeding causes reduced friction which, in turn, can cause skidding for drivers. The case study focuses on alligator cracking, potholes, and bleeding in an effort to explain their impact on pavement, as well as how they are remedied. In an effort to better understand the detriment these issues cause, a local two-lane road was studied for evidence of distress and damage.
...

Position statement4

Misrepresentation of facts.4
Negligence.5
Corporate Decision-making...6

Summary

General Motors Company deals with automotive, in most cases, vehicles. The management was aware of the problems with the ignition switch which could force cars to shut suddenly down, disabling their steering. In practice, this could bring about an action on strict liability against the company by the consumers. According to the law, the producer incurs strict liability whenever there arise safety ramifications which the producer is aware of. In this case, it is apparent that General Motors is aware of the defects and the harm they could cause to the ...

There exists a number of Canadian Companies that have set up base in Germany. Some of the top Canadian companies in Germany include CAE Electronics, Bombardier, and Magna. CAE is the global leader in modeling, simulation and training for civil aviation and defense. Bombardier manufactures planes and trains. In fact, it is the world's only manufacturer of both planes and trains. Magna is an automotive supplier which has its headquarters in Aurora, Ontario.
The key industries that Canadian companies have had success include aerospace and defense, agriculture, manufacturing, automobile and information communication technology. The major reason for the firms' ...

- Introduction:
Network security forms the basis of safe and private data management in modern computer networks. Network security is the elementary problem of today’s computer and communication networks in the presence of vast variety of spams, viruses and internet threats. Network security provides the solution to such problems of privacy violation and unauthorized access to personal and confidential data by implementing the laws and rules which reduce security violation significantly. Network security evolution is a continuous process which has evolved since the invention of first virus and it will keep on evolving as new types of viruses ...

Abstract

Concrete acts as one of the most essential and cost-effective construction material made from a mixture of sand, cement, aggregates, and water. Cement acts as a binder for holding all the components together. Engineers working in the construction site must understand the purpose of the construction because different structures require different concrete strengths. The strength of cement paste used controls the overall strength of concrete that depends on the water-cement ratio. The following experiment was conducted to investigate different mechanical and physical properties of concrete.

Objective: To determine mechanical properties of concrete.

Materials used: Aggregate (coarse and fine), sand, cement, water, compressive machine, cylindrical and rectangular molds, timer, ...

Analysis of the Jaguar F Series Coupe Launch Campaign

(Instructor Name)

Introduction

The report examines the television advertisement used for the launch of the F Type Sports Coupe by Jaguar during the American Super Bowl in February 2014. The ad has subsequently been used for launch activities of the car across all English speaking markets.

The ad can be seen at https://www.youtube.com/watch?v=2Bls1KKDwmo (Jaguar, 2014a)

The theme chosen has been British villains and the tagline “It’s Good To Be Bad”

The ad is directed by renowned Australian-British film and television Director Tom Hooper (IMDb, 2014), who directed The King’s Speech (2012) and Les Miserables (2010). The theme stems from the simple fact that all the good Hollywood villains are British. Using a series of shots ...

Ethics are moral principles that govern a person's or group's behavior. Should a company spend extra money on ethical behavior; deciding between right and wrong decisions as it is important from the human aspect? There have been cases where a company doesn’t break a law but is still morally wrong according to others. The best example is one of the top car making company, Toyota and their safety standards.
One of the most important aspects of being a car making company is safety concerns for both the consumers and employees; and how issues are handled should a safety concern arise. A couple of ...

Abstract 3

Introduction 4
Shipbrokers Chartering 5
The Ship-broking Market 6
Diverse Industry 6
Dry – Cargo Markets 7
Ship-Owners’ Preference for Shipbrokers 8
Identify carriers for cargoes and cargoes for carriers 8
Information Source 8
Dispute Resolver 9
Conclusion 10
Abstract
Shipbrokers have a significant influence on day to day business transactions when it comes to charters and sales and purchase activities in the markets. The ship-owners value the brokers’ capabilities for negotiation, knowledge, and information and their perception in the market. In additional businesses, the luxury-oriented services create goodwill and ...

<Put our name here>

Volkswagen AG
Sirs:
The Volkswagen AG has recorded a turnover of GBP 1.4 in the year ending December 2013 the highest ever in the history of the group. The operating profit of the group recorded an impressive 66% growth to GBP 137.9 million during the same period. This makes the group the largest car and automotive manufacturer in the world. The automobile industry today faces significant competition and market saturation. One of the main strategies that we have adopted is to offer more than one car in the same segment to ensure we ...

Creating sustainable Remote mining operations for the future

(Author Name)
(Instructor Name)

Introduction

The OECD Environmental Outlook to 2050 Report paints a grim picture of the Earth’s condition by 2050 (Holloway, 2012). Due to negligence towards the increasing environmental degradation, the changes in climatic conditions are likely to be severe. Simultaneously, it predicts a world population of 9.2 billion people with a global GDP of over 300 trillion USD, four times the 75 trillion USD it was in 2010 (Gillespie, 2014). Over 70 per cent of the population of the planet will live in cities by 2050, as compared to 50 per cent in 2008 (UNEP, 2010). To support ...

Executive Summary

Project Management is highly important aspect of making any deal between two or more organizations, especially those that involve works and infrastructures that are intended to be used by the public citizens. A joint project between a for profit and a government-related department or organization, for example, such as the construction of public works, highways, transportation systems, among other forms of infrastructures, should be carefully managed by a carefully selected and credible team of project managers. The outcome of the project be it good or bad, will basically depend on the effectiveness and the efficiency of these people in doing their job. ...

Business Strategy

Business Strategy is termed the determination of a fundamental long haul objectives and goals of the undertaking and the reception of activities to accumulate all assets to complete these objectives. With the end goal organizations should succeed they think of a heading in which it will lead them down a long haul accomplishment of targets empowering them to develop and stretch. With a specific end goal to wind up fruitful another entrepreneur must figure out what market it ought to enter and in the event that it will can rival other comparative markets. When the business sector is chosen, for example, the air ...

Demand refers to the quantity of a commodity a consumer is willing to purchase under different conditions. The demand for a commodity depends on a number of factors like the price of the commodity, income of the consumer, the price of substitute commodities, the price of complements, the preference for the good by the consumers, fashion trends, seasonality, and such others. Therefore, the demand function can be written as:
QD = F(P, Y, PS, PC, T, O)

Where, QD: Quantity demanded

P: Price of the commodity
PS: Price of the Substitute commodity
PC: Price of the complementary commodity
T: Consumers’ tastes and preferences
...

MEMORANDUM

Good afternoon,
As requested, attached is my recommendation report aviation investigation report A09C0028.
Sincerely
(First name, last name)

Transportation Safety Board of Canada

Introduction
A gear up landing takes place when the aircraft makes a landing without the ecompletrel extension of the landing gear. The term gear- up details that the underside of the aircraft is applied in order to land. Conventionally, there are occurrences where gear up is referenced by the events where a mechanical error deters the pilot from extending the landing gear. In the event of a gear- up landing, there is normally substantial damage that is incurred to the ...

Q1.
The style A fixtures that can be loaded into an intermodal 40 foot ocean container is calculated using the size of one style A package dimensions. The standard volume of the 40 foot container is (40 ft* 8 ft* 8 ft) = 2560 cubed feet. The volume of one style A package is (12” * 12” *12”) = 1728 cubed inches, which is equivalent to one cubed foot. Therefore, 2560 style A fixtures can be loaded onto a 40 foot intermodal container.
Q2.
The style B fixtures that can be loaded into an intermodal 40-foot ocean container is calculated ...

{Author Name [first-name middle-name-initials last-name]}
{Institution Affiliation [name of Author’s institute]}

Introduction

This application database named 'Budget Car Rental' is being maintained by an imaginary company to process car rentals for customers. It is a small business based in Melbourne. They mainly rent out Luxury Cars and 4X4, sport, supercars. The database consists of tables for customers, cars, and order processing. Customers need to be a member to be able to rent cars from Budget car Rental Service. In order to service the demands of customers and to run the business smoothly, the company needs to know how many numbers ...

Introduction:

The main purpose of the experiment was to carry out a tensile test on A36 steel and 6064-T6 aluminum. The experiment aimed at determining yield strength, rupture strength, ultimate tensile strength, the modulus of elasticity, the ductility of the materials under test. In real life engineering applications the tensile test is one of the most important and useful test that can be utilized to determine the mechanical properties of a material. Different materials have different mechanical properties and hence have different engineering uses.
In engineering, it is imperative to determine the mechanical properties of a material as it helps in determining ...

Abstract

The objective of this laboratory experiment is to examine the qualities of projectile motion. Considering the movement of a steel ball in the horizontal plane, the initial velocity that is possessed by the steel ball can be ascertained from the assessed range. Considering the assumed initial velocity of the steel ball, the range of the projectile will be assessed for a variety of initial angles. The initial angles and will be computed by the application of the theory with regards to motion for constant acceleration.

THEORY

Considering a given initial speed demonstrated by v0→, with an initial velocity demonstrated by s0→ that is ...

On June 28, 1914, World War I started between Serbia and Austria-Hungary with the assassination of Archduke Franz Ferdinand. As time went on, many other countries joined the war. Three years after the start of the Great War, the United States entered World War I due to the Zimmermann telegram, the sinking of the Lusitania, the sinking of other ships by the German U-boats, and the Russian revolution as well as for financial reasons. On April 16, 1917, the United States declared war and sided with the Allies. In 1918, the war that changed the world forever had ended.
...

Abstract

Mapping the Innovation in Toyota Motors
Toyota Motor Corporation is a Japanese based automotive manufacturer with its main headquarters in Aichi, Japan. Toyota Inc is known as the 14th largest company of the world in terms of revenue recognition that consisted on more than 300,000 employees in different parts of the world. In the financial year (FY) 2010, the company reported the 200 millionth vehicles in their manufacturing plant. Toyota is known as the first company that produced 10 million vehicles per year. It is an economically viable company with its share listing in different parts of the ...

- Difference between cash balance and profit
Lily runs a flower arranging business but is unaware of the accounting and finance aspects of it. Her friend has prepared the financial statements for her, and she would like to know it in detail. From the information given, it is seen that Lily has enough cash on hand. Hence she supplies the services on credit and makes payment in cash. She is also planning to purchase a vehicle and make the payments in cash. The source of additional cash is given which is an inheritance of money. Hence, she has decided to ...

Problem statement

The knowledge on how materials behave or fail when subjected to different conditions is of critical importance in the engineering field. This knowledge will ensure that there is appropriate selection of material for diverse working conditions. Thus, it is paramount to establish the features that are associated with unique classification of material. In this experiment, the behaviors of A36 steel and the aluminum when subjected to impact loading are investigated. To compare these two materials, the amount of energy required to break a respective piece are compared.

Procedure

Equipment: Tinius Olsen machine, Pair of thongs
Material: A36 steel and the ...

Introduction

The section under analysis covers the distance from Milton Road in the West Butler Avenue to Ponderosa Parkway in the East Butler Avenue. This is a multilane highway with 4 lanes covering a distance of three miles. The avenue is both divided at some section and undivided in others with numerous access points. The traffic projections over the next six years are calculated using an estimated 5 percent growth rate in hourly traffic volume. The report also analyses whether the 4-lane highway will accommodate the projected traffic in 2020. Data collection was done through online research and physical observation of the ...

VW Group Strategy

Introduction
Volkswagen (VW) is a global automotive industry based in Germany. The industry specializes in the manufacturing and distribution of vehicles in Germany and other parts of the world. With the current challenging business environment and the high competition in the automotive industry, VW group ought to come up with effective business strategies to make her succeed. The company composes of experienced employees that dedicate their time and efforts to produce unique products into the automobile market. VW Group has set a 2018 strategy aimed at positioning the company as a business leader among all automobile manufacturers globally (Volkswagen, 2014). The ...

Introduction

Atlas Airline Worldwide Holdings, Inc is a major holding company that has a principle subsidiary. AAWW is one of the global providers of outsourced aircraft plus the aviation operating service, it offers its services under four segments that is; ACMI, AMC Charter, Commercial Charter and also Dry leasing (Atlas Air Worldview Holding, Inc 2013). The company also manages and operates a fleet of 747 freighters with their customers including; airlines, freight forwarders, express delivery, the United States military and charter brokers. It’s a global company that operates in Asia, Africa, Europe, Middle East, Australia, the Middle East and South America.
The ...

Abstract

A hybrid car is a car used to drive the drive wheels more than one energy source.
Hybrid car called the vehicle driven by using the hybrid power plant. A distinctive feature of the hybrid power plant is to use two or more sources of energy and their corresponding engines that convert energy into mechanical work. Some sources of information used, the term "hybrid engine", which from a technical point of view is incorrect.
Despite the diversity of sources of energy (thermal energy of gasoline or diesel fuel, electricity, compressed air energy, the energy of the compressed liquefied gas, ...

Management- Business Decision Making

Transport is one of the most important and fastest growing sectors of the world. It has evolved as an industry and today there are many players whom all provide some manner of specialized service to their customers. As the market has grown the technology has also advanced and today you find that not just heavy commodities like wood, timber and steel are getting transported but also perishable items like seafood and vegetables get transported for long distances due to the availability of long distance refrigerated vehicles. In the light of this, the transport industry has been made the focus ...

Introduction: Traffic jams and pollution are one of the biggest problems on the road today. With 43,500 employees, our company is the biggest contributor to this problem in our county. We conducted a survey to look at some of the transportation habits of our employees and find solutions to reduce them.
Employee carpool habits: As shown in the Pie chart, 64 percent of the workforce never uses a carpool. This is a big problem and a major contributor to the traffic.
Use of Public Transport: 54 percent employees use public transport every day which is a healthy sign. But the problem ...

Identification of Policy Area

Traffic congestion is when vehicles travel at speeds slower that it would be desired because there are more vehicles than a given road or road section can handle (Wigan, 1974; Cahill, 2007). Singapore was the first country to implement an urban traffic congestion-pricing scheme. The government of Singapore through the Land Transport Authority (LTA) formulates the policies to control traffic congestion in the country especially in Singapore city (Doli, 1993; Holland & Watson, 1980). The government came about the traffic control policies upon noting that the Singapore was growing at a fast rate, many people could afford cars. In early 1970s, the ...

Introduction

When objects are accelerated, inertia-forces are generated. This is the case with rotating machine elements. The design of such parts must ensure that they perform their intended work under all the existing combinations of service loads and rotational forces or inertia forces. The rotation of a machine element results in an external vibrating force. The shaking force disturbs the supporting frame of the machine and the adjacent parts. It is also worth to note that the vibration generated by rotating machine elements and consequently the associated noise is also a serious problem to the machine operators. Therefore, it is very important ...

Abstract

Presented in this report are the results and the discussion of results for static and dynamic balancing. Static and dynamic balancing of rotating element in a machine is very important. The report has shown that the disks may be statically balanced but dynamically unbalanced. In the second part of this experiment, the arrangement required to balance the rotating shaft dynamically was obtained. The observations and results obtained in this experiment were consistent with our expectations. The second part of the experiment-involved determination of parameters needed to balance shaft and dynamically. The parameters determined in this case in order to balance ...

This jack is operated by turning the handle in a clockwise direction. The action of the screw then makes the load rise (Cleghorn, 2010). A research was carried out on the weights of most family cars to determine the maximum weight the jack can lift. The average weight of a family car according to the research is about 1660kg, much of this weight being on the engine side, about two thirds. The jack will support a load of up to 610kg. With a safety factor of 1.63, the maximum lift of the jack can be determined as follows:Maximum lift * how much weight = 610× ...

Introduction

In the past, agricultural production has relied on traditional approaches to enhancing farm production. For instance, farmers in the past used conventional approach such as the migration of birds to determine the climate conditions that were approaching. According to Zhang and Pierce (2013), farmers made planting decisions based on their experiences relating to the climatic conditions. However, traditional approaches to farming have severely resulted to a decrease in output because of the different and varying conditions that are beyond the comprehension of human experiences. As such, sensors have been developed for application in crop and animal faring with the goal ...

- What search string would you use with Google to locate a Web server that was offering up a directory listing of the /etc directory, including the passwd file
Web server + directory listing + etc directory + password file
- You are analyzing network traffic and you see the string dXNlcjpwYXNzd29yZA== in a Web request where the client is authenticating with the server. The from this request is and the password is
- Before you embark on a penetration test, what is the very first thing you want to get?
The very first thing to get before embarking on a penetration ...

Experiment 11

Introduction:
When a body moves in a circle and its angular speed changes, the body experiences an angular acceleration. Torque gives the body an angular acceleration. Rotating a body necessitates to overcome rotational inertia of the body, known as its moment of inertia. In highly symmetrical cases it is feasible to develop formulas for calculating moment of inertia of a body. In this part of the experiment, a constant torque was applied to a circular disk that could rotate on a low friction bearing. The disk span up to a higher angular speed. Object of this experiment was to calculate the disk's angular acceleration and relate it ...

Business

Failures are a part of the organizations, as failures mostly occur due to imperfect strategy which results in decrease in sales and market of that particular Organization. And thus the companies look for different alternatives to turn the outcome and change in strategy is the first step normally does by many companies. This article highlights the fact the negligence, loss and strategy errors that ruined a particular product of an organization.
Well when it comes to bouncing back from its failures the “RENAULT DUSTER” comes in my mind. The company Renault entered the Indian market through a joint venture with “MAHINDRA & ...

a Course, College, country
b Course, College, country

Abstract

Tensile strength is a kind of force which is applied by pulling something such as rope, wire etc. to the point where it breaks [1]. The tensile strength of the material is the maximum amount of tensile stress that it can take before failure [1]. There is different kind of tensile strength yield strength, ultimate strength, breaking strength. The tensile strength can be found using tensile test which is a kind of the mechanical test [2]. Tensile test are simple, inexpensive and fully standardized. The motto of this paper is to analyze the tensile ...

The Australian car industry has been experiencing a decline in sales both domestically and internationally. According to reports the continued poor performance of the industry will lead to lose of jobs with the leading car manufacturer, General Motors Holden, announcing that it is planning to lay off 400 workers. The poor performance is basically due to the high cost of production in the Australian market. As a result, to rescue the industry therefore, the government has to come in by providing subsidies (ABC News, 2013). The subsidies will help the industry survive the hard economic time it is experiencing. The high ...

I would like to acknowledge the following persons and organization who did my research to be successful. They worked tirelessly with me to ensure that this research was successful.
- The university management which provided the resources that I needed in the research.
- My very able lecturers who assisted me during the research period and guided me on how I should go about it.
- The librarian and all the workers that work in the library who always ensured I could get the books I needed for my research.
- The people who proof ...

I was given the opportunity to visit the Arbutus Volunteer Fire Department, Inc. together with some classmates as an educational trip. It is located at 5200 Southwestern Blvd. Arbutus, Maryland. The visit was very informative and enlightening in terms of having been provided with new information regarding addressing rescue, fire incidents and emergency cases. As such, the first exploration made was to orient us with the ambulance service. The major parts that were presented included diagnostic equipment, the transport equipment, the airway equipment (which includes the portable oxygen unit), the splinting equipment (that is used to immobilize parts of ...

Introduction

With the evolving technology around the globe, security systems have continued to experience rapid improvements. This has been facilitated by increased sophistication of hardware and software products. Industries have benefited greatly from these improvements especially in terms of security. One of the major innovations that have arisen from these sophistications has been the integration of radar systems in security systems. The RADEC-M automatic door sensors have proved to be a success in this field. This paper provides an analysis of the RADEC-M sensors with focus on their functionalities and how they have revolutionized the security systems. These sensors are used ...

Cost of airline Ticket in United States

Since the start of the year 2013, air carriers have increased the price of air tickets four times. There are several reasons that cause this rise in airfare increases. First is the rise in fuel costs that has hit the industry in recent months. The Middle East turmoil is the major cause of sharp rise in fuel prices. A gallon of jet fuel today costs $2.99, a 58% rise from $1.89 since last summer. According to Federal Aviation Administration (FAA), 2012, fuel costs accounts for approximately 40 percent of airline industry’s costs. Secondly, there is less competition attributed to ...