Essays on Electrochemical

Aims and Objectives of the Experiment

The main objective of this experiment is to determine the concentration of different substances. This is achieved by determining the end point(s) of different titrations using the automated potentiometric titrator. These points are known as equivalence points. The units of measurement are the standard units used in titrations i.e. Molarity (moles/liter) of substances used while the quantities of these substances are measured in mL (milliliter).

Theory and Principles

Potentiometric titration is a volumetric method which measures the potential between two electrodes, namely reference and indicator, with the change in the volume of the reagent that is added, known as the titrant. ...

Abstract

Application of the nanofiltration (NF) and ultrafiltration (UF) processes is applied in the handling of water that is produced raw. The application has been investigated in the current day through various studies (Wang 14). The experiment of the processes of both nanofiltration and ultrafiltration is conducted in the laboratory unit which is operated in a pattern of cross flow (Ashaghi, Ebrahimi, & Czermak, 46). The study that was conducted in Oilfield of North Sea using the process of membranes of ultrafiltration (UF) and microfiltration (MF) indicated that the content of hydrocarbon decreased from 50 mg/l to 2 mg/l which recorded ...

Introduction: All most all metals are unstable when exposed to air. This is because of the tendency of the metal to be converted into its oxidized form on reaction with air. When compared to zinc, iron has a greater tendency to form oxidized form and thus has greater susceptibility to corrosion. The ability of metals to react with air varies and this determines their relative stability. As zinc is much stable when compared to iron, it is used to galvanizing iron pipe, thus preventing contact of iron with air and water that contains dissolved air. Brass is an alloy ...

Report for Voltaic Cell Project (Lemon)

The purpose of the experiment is to demonstrate the production of electricity through the use of Zinc, Copper and Lemon. The experiment explores the electrochemical reactions that take place between the two metals in the presence of citric acid provided by the lemon to generate electricity. It highlights the oxidation and reduction reactions that occur within the lemon battery before electrons are released to generate electricity.

Background

The electrochemical reaction that occurs to generate electricity from chemical energy takes place between tow metal pieces, known as the electrodes, and a liquid known as the electrolyte. It is imperative that the ...

Fuel Cell Technologies in Passenger Cars

Fuel Cell Technology The last decade is characterized by the rapid development of research activity in the field of fuel cells, thus, creating the conditions for their uptake in electric systems. The basic fuel cells’ operating principle has been known for 150 years. However, a variety of technical and financial problems had kept them on the margins of technological applications (Brandon & Hart, 1999). The basic difference between a fuel cell and batteries is that while batteries store energy, fuel cells directly convert a fuel’s chemical energy into electricity by an electrochemical reaction (i.e. Without requiring combustion or movement ...

Microbial fuel cells are devices that employ bacterial or other microbial cells to generate electricity (Singh, Pratap, Baranwal, Kumar and Chaudhary, 2010). Cells generally carry out electron transfer and oxidation-reduction reactions during normal metabolic activities. Electrons generated during these reactions can be made to flow through an external circuit to generate current. Fig 1. Depicts a typical MFC. The anodic compartment consists of microbial culture in glucose or other medium (Singh et al, 2010). Wastewater can also be used as a substrate source for microbes in a MFC intended for effluent treatment application. The microbial cells breakdown complex substrates ...

The objective of this experiment was to get acquainted and study galvanic cells, Nernst equation, and electrochemical reactions and determine the experimental value for the Ecell vs. log Q for Cu/Zn cell. Galvanic cells are the systems which can produce electric current due to reactions occurring in them. In our common understanding these cells are the batteries. In these cells, the processes of electron transfer and corresponding chemical reactions occur due to the difference in tendency of different substances to gain electrons. The galvanic cell typically consists of two half-cells and a junction between them which is often a ...

Introduction

Quality of air is a determinant in the quality of life, indoor air is important as people spend on average 80-90% of their lives in door (WHO, 2007). Indoor air quality began a long time but only been a health concern decades ago when awareness of contaminants presented in the air. The problem begins when the construction of building are highly insulated to conserve energy, which caused a trap to air intoxicants inside the building (E. Willard, 2005). This causes the exchange of outdoor to indoor to lessen and therefore the indoor air pollution builds up.

Indoor air quality is a complex issue as ...