Essays on Heat Transfer Coefficient

Abstract

The document considers the use and conservation of energy in domestic dwellings using heating systems, specifically water heated boilers, which is the cheapest solution in the market for home heating systems in Ireland and Europe. The document starts with a literature review of the available home heating systems and focuses on boilers due to its availability and price. The literature review includes a standard boiler array for a typical house, the radiators materials, and key concepts to understand the use of boilers for heat generation in homes. Later, it is necessary the calculation of heat transference for a given ...

My Name

Shell and Tube Heat Exchanger Lab Report Objectives Introduction A heat exchanger refers to a gadget that aids the transfer of heat from one fluid to another. The fluids involved can either be in direct contact or separated to avoid mixing (Ramesh & Sekulic, 2003). They are in common use in sewage treatment, natural gas processing, petroleum refineries, petrochemical plants, chemical plants, power stations, air conditioning, refrigeration, and space heating. A perfect example of a heat exchanger is in the internal combustion engine (ICE) (Hiereth & Prenninger, 2010). In such a situation, a circulating fluid called engine cooler flows over the ...

Introduction

Building simulation methods should focus on the effect that occurs between convective heat repulsion between external air circulation and the given wall surfaces. This study will take a closer look on the effects of heat transfer on a brick surface. A tetrahedral mesh will be used to scertain for the effects that are caused on the walls. A brick wall is known for its thermal characteristic of absorbing heat. Therefore, this thermal property will also be studied in this study. Most authors have attributed this norm to behavior of the different correlations that are used to estimate the exact value of ...

Literature review

Heat transfer and friction characteristics in a square duct roughened by various shaped ribs on one wall [Aliaga, b, 1994]. Liquid crystal thermograph is used to measure local and average heat transfer coefficient of ribbed surface. The ribs height to duct hydraulic diameter ratio is fixed to 0.1. The rib pitch to height ratio varies from 8 to 15 and Reynolds number spans from 8000 to 20,000[Aliaga, b, 1994]. The experiment consists of heat transfer test and pressure test. The test experiment consists of 750mm long smooth duct followed by a rib-roughened section of equal length. Plexiglas plates are applied to ...

Affiliated institution

Geothermal Binary Rankine Cycles Abstract This report is for a LOW-BIN (Efficient Low Temperature Geothermal project. The main objective is to study and recommend specific optimal Rankine cycles using water as the primary source of heat. The water is at a temperature of 1600C. This Rankine cycle is using R134 as working fluid for the geothermal power machine. This project is supposed to generate electricity from low temperature resources with profitable operation down up to around 600C. The main Rankine Cycle parameters and components are idealized. This is as found in the shell, the tube condenser and the heat ...

Abstract

This paper clearly presents and defines the numerical study on how hollow building block operates to suppress the convectional currents and reduce the amount of heat flux transferred across the petition of the building wall. The configuration and weight of these blocks have made them to fully be utilized in building the facades. The air filled cavities (hollow cells) together with the small cross-sectional area geometry provides an appropriate elevation for the building block. The hollow polythene bars inserted in this bricks also helps to reduce the heat by about 36% depending on the petition number (Mejad 2006). ...

Abstract

Heat transfer through a cylindrical pin fin s studied. For the purposes of this study, thermal conductivity, heat transfer coefficient and the source terms and the sink terms are assumed to depend on the temperature. In the model being used for the study, the source and sink terms are given as arbitrary functions. We therefore employ techniques on symmetry to find the forms of the source and the sink terms which the extra lie point symmetries are admitted. The method of separating variables is used in the study to get the exact solutions when the equation for the equation is ...